Or copy the “RAID_NVMe” folder
from MSI Driver disk(Path: MSI Driver Disk\Storage\AMD\Packages\Drivers\SBDrv\RAID_NVMe)
to your USB flash drive.
2. After complete the BIOS settings in BIOS\Intel(R) Rapid Storage
Technology(Please refer to P.110 in the manual). Get into windows 10
installation disk and choose “Load driver”.
3. Choose AM4_RAID_Driver\AMD
9.2.0.70\Packages\Drivers\SBDrv\RAID_NVMe\RAID_bottom\WT64A then click “Next”.
4. System would show: “AMD-RAID Bottom Device(C:\AM4_RAID_Driver\AMD
9.2.0.70\Packages\Drivers\SBDrv\RAID_NVMe\RAID_bottom\WT64A)”, please
choose the first one and click “Next”.
5. Then system would show “We couldn’t find any drives. To get a
storage driver, click Load driver” message. Please click “Load driver” again
and get into AM4_RAID_Driver\AMD
9.2.0.70\Packages\Drivers\SBDrv\RAID_NVMe\RAID_driver\WT64A, then click
“OK” and “Next”.
6. The system would show “AMD-RAID Controller[storport](AM4_RAID_Driver\AMD
9.2.0.70\Packages\Drivers\SBDrv\RAID_NVMe\RAID_driver\WT64A)”, please
choose it and click “Next”.
7. The system would recognize the RAID volume finally(Kingston
SA1000m8/240g M.2 x2 pcs).
