Register Now!

To Get More Info and Daily Reward.

Please login or register.
Pages: [1]   Go Down

Author Topic: X99A Mpower will not start after going into sleep mode  (Read 173 times)

0 Members and 1 Guest are viewing this topic.

meinqaTopic starter

  • PRIVATE FIRST CLASS
  • ***
  • Offline Offline
  • Posts: 6

Hi there

I have been experiencing this issue for some time now.

When the computer is left for a while and goes into sleep mode it is not possible to wake it with the mouse or keyboard.  Furthermore even pressing the power button has no effect.  Typically for the computer to start I need to toggle through several iterations of turning off the mains power connection, leaving it for 30 seconds or so and trying to start if from the power button.  It is not uncommon for this to have to be five or six times before the computer springs into life.  Even if the computer does not restart during these iterations the on/off switch on the board is illuminated, so it does not appear to be a power issue.

Very frustrating so I would be grateful for any advice.

Tks
Logged

Svet

  • T9246ED, Бивша комета
  • Administrator
  • *****
  • Online Online
  • Posts: 68666
« Reply #1 on: 26-September-17, 05:00:24 »

what bios version board is using?
OS?
see >>Posting Guide<<
Logged

meinqaTopic starter

  • PRIVATE FIRST CLASS
  • ***
  • Offline Offline
  • Posts: 6
« Reply #2 on: 12-October-17, 10:55:45 »

Sorry for the delay in replying, I had an issue with my login.

The current BIOS version is E7885IMSv22.6 (M60)
Logged

Svet

  • T9246ED, Бивша комета
  • Administrator
  • *****
  • Online Online
  • Posts: 68666
« Reply #3 on: 12-October-17, 11:08:15 »

okey, can you please also answer other stuffs and to list a full system specifications
see the link in my prevision reply
Logged

meinqaTopic starter

  • PRIVATE FIRST CLASS
  • ***
  • Offline Offline
  • Posts: 6
« Reply #4 on: 13-October-17, 11:09:51 »

System configuration

Board: X99A MPower
BIOS: E7885 IMS v22.6 (M60)
VGA: Sapphire AMD Firepro W7100 Internal Graphic Card 8192 MB
PSU: Seasonic SS-1200XP3 
CPU: Intel Core i7-5820K
MEM: Corsair Vengeance LPX 32GB (4 x 8GB) Memory Kit PC4-19200 2400MHz DDR4 DIMM C14
HHD / SSD: 
Cooler: [font="Helvetica Neue", Helvetica, Arial, sans-serif]CRYORIG R1 Ultimate[/font][/color]
Keyboard: Logitech DeNovo Edge
Mouse: N/A
OC: None
OS Windows 10 Pro 64 bit

Please let me know if you need further info.
Logged

Svet

  • T9246ED, Бивша комета
  • Administrator
  • *****
  • Online Online
  • Posts: 68666
« Reply #5 on: 14-October-17, 08:21:57 »

can you follow this guide to the letter?
https://forum-en.msi.com/faq/article/wake-on-lan-wol

else im attaching .MC3 bios if you want to try
Logged

malikprotect-ddd

  • PRIVATE FIRST CLASS
  • ***
  • Offline Offline
  • Posts: 10
« Reply #6 on: 14-October-17, 23:45:05 »

I had a similar problem recently.

Fixed it by going to device manager and unchecking the "allow the computer to turn off this device" on the Intel Management Engine Interface driver.
Logged

malikprotect-ddd

  • PRIVATE FIRST CLASS
  • ***
  • Offline Offline
  • Posts: 10
« Reply #7 on: Yesterday at 15:28:08 »

UPDATE:

Looks like I didnt fix it as today it refused to wake from an S3 state in Windows 10 64-bit.

All the lights and fans turn on but Power LED flashes as though its still in sleep mode.
Logged

Svet

  • T9246ED, Бивша комета
  • Administrator
  • *****
  • Online Online
  • Posts: 68666
« Reply #8 on: Yesterday at 15:37:18 »

@malikprotect-ddd
if you want to troubleshoot own issue,
please open new own topic
Logged
Pages: [1]   Go Up