Register Now!

To Get More Info and Daily Reward.

Please login or register.
Pages: [1]   Go Down

Author Topic: b350m Mortar Arctic RYZEN 3 1200 EZ DEBUG Issue  (Read 173 times)

0 Members and 1 Guest are viewing this topic.

jaydmjacksonTopic starter

  • PRIVATE FIRST CLASS
  • ***
  • Offline Offline
  • Posts: 6
b350m Mortar Arctic RYZEN 3 1200 EZ DEBUG Issue
« on: 12-October-17, 18:30:05 »

I'm having an issue getting my PC to post. All components installed and the CPU light is on!

Specs:
b350m mortar arctic MB
ryzen 3 1200 cpu
Crucial ballistix ddr4 2400 RAM 1x4GB
Corsair 450m PSU
Basic Radeon GPU (awaiting 1050ti, current GPU is simply due to no onboard graphics)

Things i have tried:
Ram in different slots- ram light comes on unless in the "correct slot" no2
removing cpu and, checking and re-installing
with & without GPU
Different PSU

I don't know what the issue could be. The MB states it supports the 1200 without an updated bios. Thank you in advance
Logged

Svet

  • T9246ED, Бивша комета
  • Administrator
  • *****
  • Online Online
  • Posts: 69200
« Reply #1 on: 16-October-17, 19:14:15 »

try reseat the CPU and check for any bented pins on it
make sure the CPU heatsink its not too tight
boot with board out of PC case placed over wooden table or cardbox with barabone setup
Logged
Pages: [1]   Go Up