Close

Register Now!

To Get More Info and Daily Reward.

Please login or register.
Pages: [1] 2 3 ... 10
 1 
 on: Today at 13:55:36 
Started by r.mikaeljae - Last post by rbleroy91
I noticed with EZ DEBUG LED the first light would be on 'CPU', turns off for a few seconds then 'VGA" will be lighted next, same with cpu it turns off for a few seconds
Good thing for CPU, (RAM) and VGA! :biggthumbsup:

Quote
CPU fan and GPU fan is running although there would be no display on the monitor
For now, we will work about that; BOOT EZ Debug LED will be adressed later.
On what 1050's port your monitor is connected? Have you tried with other ports (mainly DVI-D)? What is your monitor model? Not a TV? Do you know your current bios version?
Please, try that:
- power on keeping <DEL> pressed 20s (even if the screen is blank/black, you would be entered in bios), press <F6> (should load bios optimized defaults), then press <ENTER> (confirm load), wait 2s, then press <F10> (save changes & exit) and then press <ENTER> (confirm save & exit)
- normally, pc should restart automatically; if not try again one time.

Hoping this will help,
:hat tip:

 2 
 on: Today at 13:33:04 
Started by r.mikaeljae - Last post by r.mikaeljae
Hi All,

I just built a new pc, been having some problem in booting. If i turn on the CPU, CPU fan and GPU fan is running although there would be no display on the monitor. I noticed with EZ DEBUG LED the first light would be on 'CPU', turns off for a few seconds then 'VGA" will be lighted next, same with cpu it turns off for a few seconds then 'BOOT' will light and it stays on.

Could someone please help check?

Here's the specs below:
Ryzen 3 1300x
MSI B350M PRO-VDH
8gb Kingston 2400 ddr4 (x1)
Galax 1050ti EXOC
Seasonic 520W ATX12V
1TB SeaGate

 3 
 on: Today at 13:07:01 
Started by robbiemcclinton - Last post by Svet
try with another and quality PSU 1st

 4 
 on: Today at 12:35:42 
Started by yashch1998 - Last post by yashch1998
Played using max settings and it was amazing.
Got around 180fps.
There was no lag nor any bottlenecking.

Later i will try playng the game with 4K resolution and post the details. 
But as of now gaming experience is amazing with the 1060.

 5 
 on: Today at 12:33:15 
Started by pablocol - Last post by rbleroy91
Hello,
You said "7A34v1F" as bios version so I supose that you have a B350 Tomahawk mobo.

Quote
I finished configuring updates with the MSI Update
I recommend you to uninstall LiveUpdate because its use is very riskly (bios update has broken mobo for numerous users)! :yes:
What other MSI utilities are you using?

Quote
BIOS VERSION: 7A34v1F /downgrade bios
What is currently your bios version F or H? Have you the reboot problem with the 2?

Please, begin by a clear CMOS:
- Shudown pc
- DO NOT (specific for B350 mobos) Unplug the power cord and wait that all mobo's LED lit off.
- Either
  . short JBAT1 during 10s (if you have not a jumper cap, you can use something like a screwdriver but be cautious to touch only the 2 pins of JBAT1),
  . remove the battery cell during 30mn.
- Plug the power cord then power on.
- Load bios default values when asked during start then change nothing in bios for the moment.
Retry. Does it work now?

Good luck,
:hat tip:

 6 
 on: Today at 12:31:16 
Started by ahl.88 - Last post by Svet
Check PM FYI and queries.

 7 
 on: Today at 12:24:56 
Started by juliusjustus - Last post by juliusjustus
Hey all,

for the last some weeks, I noticed that my temperature while gaming Overwatch, Far Cry or any other game (without OC) is easily between 88 - 90 Degress for my GPU (Cooler Boost on). CPU is fine though with easily below 80.
I am not expecting to run super cold, but I am a bit worried.

Are those temperature still fine for the GPU?

Thanks in advacne,

Greetings

Julius

 8 
 on: Today at 12:24:50 
Started by ERROR_0815 - Last post by Svet
Check PM FYI and queries.

 9 
 on: Today at 12:22:47 
Started by Buluunee - Last post by Svet
Check PM FYI and queries.

 10 
 on: Today at 12:17:26 
Started by miguel - Last post by Svet
Check PM FYI and queries.

Pages: [1] 2 3 ... 10
We have updated our Privacy Policy. View our new Privacy Policy, Terms of Use and Cookie Policy here.