MSI Global English Forum

Motherboards => User Reviews & Modding => Topic started by: grosirsepatuwanita212 on 10-July-17, 09:26:47

Title: 【MSI PRO MOD – S5: Scratch Build】 ARCTPloration
Post by: grosirsepatuwanita212 on 10-July-17, 09:26:47
MSI PRO MOD - Scratch Build

ARCTPloration



(http://i.imgur.com/1k7X5cS.jpg)


Hi, My name is Roy,I am from Indonesia . 

my fb page :
https://www.facebook.com/profile.php?id=100016262375039
Title: Re: 【MSI PRO MOD – S5: Scratch Build】 ARCTPloration
Post by: grosirsepatuwanita212 on 10-July-17, 09:45:30
For Spesification my computer modification are :

Motherboard: MSI H110Pro ITX
Graphics Card: MSI GTX 275 Twin Frozr

POWER SUPPLY: Bitfenix Whisper 650Watt
Ram: 8 gb Team  T Force Dark Red (2 x 4gb)
Fans: Cube Gaming Ring White LED
LED: Cube Gaming Red
CPU: Intel i5 6500
SSD: Galax gamer SSD 128 gb
Title: Re: 【MSI PRO MOD – S5: Scratch Build】 ARCTPloration
Post by: grosirsepatuwanita212 on 10-July-17, 10:06:16
the concept that i want to make is build a vehicle case that used in arctic exploration
my preferenceses should like this picture  :

(http://www.antarcticatwo.com/wp-content/uploads/2014/08/desktop-wallpaper-06.jpg)

i chose the tractor vehicle that drag a cart behind for my mod model
 this is my first mod of PC case :)
thanks
Title: Re: 【MSI PRO MOD – S5: Scratch Build】 ARCTPloration
Post by: grosirsepatuwanita212 on 10-July-17, 10:17:23
this is my worklog

basicly my scracth build is from wood. i use hard wood combile with MDL with 3mm and 9 mm thickness
i cut the wood from the pattern i create before
drill and nail it together
in some part i use screw to join them together
some part also need to be glue
after glue i clamp it together so that glue can stick strong
firstly i make the base for VGA , and mother board
i plan to take the PSU outside the tractor
Title: Re: 【MSI PRO MOD – S5: Scratch Build】 ARCTPloration
Post by: grosirsepatuwanita212 on 10-July-17, 11:05:49
for the outer shell i use thinner wood 3mm
i cut it using scroll saw
i print the pattern before and take it to the surface of the wood then i cut it using the scroll saw
to put it together i use nail and glue[attachthumb=10]
Title: Re: 【MSI PRO MOD – S5: Scratch Build】 ARCTPloration
Post by: grosirsepatuwanita212 on 10-July-17, 12:05:00
AFter that is time for painting, finishing, and detailing. 
we use duplex, san polac, after that sanding and paint them
i dont have airbrush so i just go with pylox / spray can 
mostly i paint in white because it meet the "Arctic theme" in my opinion

i using acrylic too
i bend acryic use dremel versatip [attachthumb=6]
Title: Re: 【MSI PRO MOD – S5: Scratch Build】 ARCTPloration
Post by: grosirsepatuwanita212 on 10-July-17, 16:27:26
final result of the case mod
i hope you enjoy :)