2080ti Lightning Z clocks stuck @ 1350mhz under a waterblock

[mrkingx11]

hello


i have installed Bitspower waterblock on 2080 ti Lightning Z and i noticed MSI AB wouldn't allow power target control and pretty any control over the card then i noticed the clocks were locked to 1350mhz , when i try to apply an OC values the screen goes black for 10 seconds and comes back on without any changes !!!!

i was told to plug the original fans to the fan headers which is almost impossible since i have a hard line tubes setup

i tried to register my card but i get the " strange "  product not recognized error in the website and the android app !!!


someone help please

 

[david.grant81]

Hello Flobelix, 
You can send me the bios standard and the bios ln2 mod with no fan for my Lightning ?

 

[flobelix]

Card's S/N is required.

 

[flobelix]

Check pm

 

[rbrettschneider88]

Dear Flobelix,

is the custom bios confirmed tob e working with watercooled 2080ti lighting Z cards?

May I please ask for the modded bios as well? I am also stuck at 1350 mhz with waterblock.

Please pm me.

Thank you.

 

[flobelix]

Well, it is meant for nothing else so yes.

Card's S/N is required.

 

[mfj7777@yahoo.com]

Please help. My S/N is 602-V377-05SB1905000729. Please also inform once have permanent fix without glitches. Thank you sir

 

[flobelix]

Check pm

 

[devilheadas]

Hi, i bought some used 2080ti lightning with bitspower block. And i have same problem it stuck 1350mhz, can anyone send me bios to fix it? or is should just flash Galax bios?

 

[flobelix]

Add the card's S/N

 

[devilheadas]

Already found bios on overclock.net, connected fan, flashed card and it works  but damn that lightning card is bad as hell, do they bin them?  
one year i used reference 2080ti with EK waterblock, was rock solid gaming card 2130mhz, after i got Titan RTX, that could do same 2130mhz for gaming. And this one with bitspower  waterblock  max out at ~2050-2070mhz stable gaming  card never goes over 38C  3x360 60mm rads outside rig  i don't understand HOF/ Kingpin card are cherry picked and asking more money because of that, but why lightning?

 

[flobelix]

That is interesting but the oc results are unfortunately not the point of this thread so it can't be discussed here.

 

[devilheadas]

ok, so my bios now is 90.02.17.40.9D , do you think after next drivers update i will get stuck again? do you have better bios? newer?

 

[flobelix]

ok, so my bios now is 90.02.17.40.9D , do you think after next drivers update 

It does not depend on driver. These numbers are also no real manufacturer vbios version.

do you have better bios? newer?

I don't know what vbios you have but you said that you have the beta already.

 

[devilheadas]

don't know  name was V377_FanRF
can you pm me with that bios which you have? and is it possible to get unlocked msi afterburner higher voltage slider?

 

[flobelix]

don't know name was V377_FanRF

That is the beta.

can you pm me with that bios which you have?

You have the latest already.

and is it possible to get unlocked msi afterburner higher voltage slider?

No changes are possible.

 

[dennis.s2142]

SN: 602-V377-05SB1905000579
Could i have the BIOS as well? Thanks...

 

[beauvkor]

Can anyone send me the link for the bios to fix the 1350mhz issue under a waterblock?
Thank you very much!

 

[darkhawk]

You'll need to contact MSI directly for it. See : >>How to contact MSI.<<

 

[flobelix]

check pm

 

[t.roesler]

Can you please send me the BIOS file aswell?