6900XT help please

plumpkatt157a02e3

New member
Joined
Jan 20, 2022
Messages
2
The issue I am having is that my TV wont get signal when turning back on unless I unplug the HDMI cable from the back of the PC and plug it in again. The PC is not asleep as I have it set to display always on and High Performance profile.

I have a Asrock X570 Phantom Gaming 4 wifi ax with 5800x CPU. It had a RTX3070 in it till now. Since I have switched cards my Sceptre 50in 1080p TV wont get signal if I power it off and leave the PC running unless I unplug and plug back in the HDMI cable.

Any suggestions as this is very annoying as it keeps me from working remotely using Anydesk as anydesk hangs on the connecting/getting image screen. I shouldn't have to use an HDMI dummy plug. I made sure the HDMI Link Assurance I think its called is enabled(the setting that allows HDMI to sense what its connected to).

SAM is enabled. And this is the MSI Gaming Z Trio 6900XT Card.

I guess I should also mention I am running the latest driver from the AMD site.

The screenshot below, Anydesk will stay like this untill I get up and walk to the room and turn that display on. Otherwise use a dummy plug which is a rediculous solution.


BTW, new here, this is my first post.... Sorry if I didnt follow proper format in asking questions.
 

Attachments

Last edited:

plumpkatt157a02e3

New member
Joined
Jan 20, 2022
Messages
2
Well, I solved my issue. Turned out to be the HDMI cable. Not sure why as there is nothing wrong with it and it runs other devices just fine. My guess is its an older gen HDMI?
 

Alan J T

🙈 🙉🐝 🤬😈
Global Moderator
Joined
Sep 11, 2020
Messages
7,785
Well, I solved my issue. Turned out to be the HDMI cable. Not sure why as there is nothing wrong with it and it runs other devices just fine. My guess is its an older gen HDMI?
May be a older GEN cable you want HDMI 2.0 or better
 
Top