cactusdistant
New member
- Joined
- Sep 10, 2026
- Messages
- 2
b550m mobo
r5 5600g
rx 6600
2 1tb samsung nvme drives
Everytime I turn my
pc on it gets stuck in this loop of automatic repair and resetting or eventually just freezing. Very very rarely it’ll boot but if I thrn it off then it goes right back into this loop. I’ve tried everything I can think of, I’ve even tried reinstalling windows but I couldnt get it to boot off of my flash. Is there anything I can do?
The occasions prior to this it booted with everything in it, no drives or gpu removed. But just now today, it would boot into a windows blue screen (just as rarely as it would regularly boot the other times). I was only able to get into the blue screen recovery menu twice, and ran some commands, but they did not work.
I’ve tried removing both of my nvme drives
i’ve tried the ram trick
i’ve tried cmos battery
I’ve tried removing the gpu
I’ve tried loading into linux (I got stuck in the same loop)
When I was in bios YES I made sure the boot order was proper
I tried using both csm and uefi mode
I’ve tried enabling and disabling secure boot
I would’ve tried fast-boot but it doesn’t exist on my bosrd
The pc will boot if I remove the 2nd nvme drive (a samsung 990 EVO 1tb) but now I am unsure if I am able to use that drive with my pc. My other 1tb drive is currently full and I would also like to be able to "rescue" all the data off of the drive. Does anyone know how I can fix this issue so I am able to use the other nvme drive again? I saw another post and it seems like this is semi-common for samsung EVO drives.
r5 5600g
rx 6600
2 1tb samsung nvme drives
Everytime I turn my
pc on it gets stuck in this loop of automatic repair and resetting or eventually just freezing. Very very rarely it’ll boot but if I thrn it off then it goes right back into this loop. I’ve tried everything I can think of, I’ve even tried reinstalling windows but I couldnt get it to boot off of my flash. Is there anything I can do?
The occasions prior to this it booted with everything in it, no drives or gpu removed. But just now today, it would boot into a windows blue screen (just as rarely as it would regularly boot the other times). I was only able to get into the blue screen recovery menu twice, and ran some commands, but they did not work.
I’ve tried removing both of my nvme drives
i’ve tried the ram trick
i’ve tried cmos battery
I’ve tried removing the gpu
I’ve tried loading into linux (I got stuck in the same loop)
When I was in bios YES I made sure the boot order was proper
I tried using both csm and uefi mode
I’ve tried enabling and disabling secure boot
I would’ve tried fast-boot but it doesn’t exist on my bosrd
The pc will boot if I remove the 2nd nvme drive (a samsung 990 EVO 1tb) but now I am unsure if I am able to use that drive with my pc. My other 1tb drive is currently full and I would also like to be able to "rescue" all the data off of the drive. Does anyone know how I can fix this issue so I am able to use the other nvme drive again? I saw another post and it seems like this is semi-common for samsung EVO drives.