B550M Pro-Dash can't use 3200MHz RAM

[kk_chi152e02e0]

I've brought a pair of GEIL Evo-X II RAM (Part# GAEXSY416GB32) rated @3200MHz which needs 1.35v to operate.

Please note that it's not overclocking! The RAM needs 1.35v to operate @ its standard speed of 3200MHz.

Unfortunately the MB cannot set RAM voltage.

Any help would be much appreciate.

 

[Alan J T]

I've brought a pair of GEIL Evo-X II RAM (Part# GAEXSY416GB32) rated @3200MHz which needs 1.35v to operate.

Please note that it's not overclocking! The RAM needs 1.35v to operate @ its standard speed of 3200MHz.

Unfortunately the MB cannot set RAM voltage.

Any help would be much appreciate.

Have You gone into the BIOS and turned on A-XMP Profile 1

 

[kk_chi152e02e0]

Have You gone into the BIOS and turned on A-XMP Profile 1View attachment 145413

The B550 Pro-Dash only comes with a pure text BIOS,
No option to select XMP1 profile for RAM!
any help?

 

[Alan J T]

you should still be able to set ram clock to 3200 and Fabric to 1600 and rest at Auto and it will adjust the voltage to match. you can also us Ryzen Master to set RAM and Fabric clock

The B550 Pro-Dash only comes with a pure text BIOS,
No option to select XMP1 profile for RAM!
any help?

Well never mind you board does not support that ram. It does not support OC ram setting You can try with Ryzen master and see what happens i guess but be prepared to have to reset your BIOS via JBAT jumper

This is from a Board spec sheet that dose support Memory OC notice the difference in ram speeds.

Selec Profile 1 or 2 in Ryzen master select Auto OC then select Mem control included adjust ram speed and Fabric clock to 1600 and select push all Auto for memory Hit apply and it will reboot make the changes and all should be good.

 

[kk_chi152e02e0]

you should still be able to set ram clock to 3200 and Fabric to 1600 and rest at Auto and it will adjust the voltage to match. you can also us Ryzen Master to set RAM and Fabric clock


Well never mind you board does not support that ram. It does not support OC ram setting You can try with Ryzen master and see what happens i guess but be prepared to have to reset your BIOS via JBAT jumper

View attachment 145422

This is from a Board spec sheet that dose support Memory OC notice the difference in ram speeds.
View attachment 145423
Selec Profile 1 or 2 in Ryzen master select Auto OC then select Mem control included adjust ram speed and Fabric clock to 1600 and select push all Auto for memory Hit apply and it will reboot make the changes and all should be good.
View attachment 145421

Thanks. I'll give Ryzen Master a try.
Really appreciate for the input