rchoglund2126e02a6
New member
- Joined
- Jan 14, 2022
- Messages
- 4
Hey all,
This is a last ditch effort here. I flashed my bios after putting my PC together because it was out of date and didn't properly detect my display (display worked, but didn't recognize it and couldn't change settings with it).
I ran through all the steps on the MSI support page and flashed using a USB drive. Once the flash process concluded, the system restarted like normal, but now I don't have any display output. I'm using the integrated graphics on my processor, so there's no graphics card issue.
Any help or solutions for this? I was hoping I could flash again using a Flashback button, but I don't think this motherboard has that button.
Board: msi b560m pro-vdh wifi
BIOS: E7D18IMS.130
VGA: Integrated graphics Intel i5-11600k
PSU: Cooler Master MWE Gold 750w V2 Fully Modular
CPU: Intel i5-11600k
MEM: 2x8gb Corsair ValueSelect DDR4-2133
HDD/SSD: SanDisk 500gb SSD
COOLER: Cooler Master Hyper 212 evo
OS: Windows 10 64bit Pro
This is a last ditch effort here. I flashed my bios after putting my PC together because it was out of date and didn't properly detect my display (display worked, but didn't recognize it and couldn't change settings with it).
I ran through all the steps on the MSI support page and flashed using a USB drive. Once the flash process concluded, the system restarted like normal, but now I don't have any display output. I'm using the integrated graphics on my processor, so there's no graphics card issue.
Any help or solutions for this? I was hoping I could flash again using a Flashback button, but I don't think this motherboard has that button.
Board: msi b560m pro-vdh wifi
BIOS: E7D18IMS.130
VGA: Integrated graphics Intel i5-11600k
PSU: Cooler Master MWE Gold 750w V2 Fully Modular
CPU: Intel i5-11600k
MEM: 2x8gb Corsair ValueSelect DDR4-2133
HDD/SSD: SanDisk 500gb SSD
COOLER: Cooler Master Hyper 212 evo
OS: Windows 10 64bit Pro
Last edited: