Bigbang Xpower wont boot

[adbradwell]

Hi, First I'm sorry if my english is kinda bad.

I just installed motherboard, RAM and CPU because my previous PC wont boot either. The problem is the same.
When I turn it on my PC wont boot. Tried to disconnect all the harddrive, change the VGA, put only one RAM in first black slot,  but the problem is still the same. The screen still blank.
I noticed the HD Led is off and I got error code 85 on the mobo.

thx before.

 

[Mark]

First of all, clear the CMOS: >>Clear CMOS Guide<<

Have you tried another power supply? Although the one you have seems decent enough perhaps it's faulty and causing the issue.

 

[Jack the Newbie]

I got error code 85 on the mobo.

That means that the initialization of the video adapter has already happened and there as no error during that procedure (CPU and memory are initialized even before video card initialization).  Try a different monitor and/or monitor cable.

 

[adbradwell]

That means that the initialization of the video adapter has already happened and there as no error during that procedure (CPU and memory are initialized even before video card initialization).  Try a different monitor and/or monitor cable.

maybe I'll try with different DVI cable. Coz I just tried the monitor with Dsub cable to another computer and it's ON without a problem.

 

[adbradwell]

tried with different monitor and cable and still won't boot. Still got the 85 error code

 

[HU16E]

I believe your PSU is modular? Have you tried any of the other PCI-E VGA cables? Also, do you have a PCI-E cable to the boards 6-pin PCI-E connector?