Blank screen error code '67'

S

shadow85

New member
SERGEANT
Joined
Jul 2, 2013
Messages
39
I just finished making my build:

Enthoo Luxe
Corsair AX860
MSI X99 Gaming 7
i7-5930K w/ Swiftech H240-X
SLI MSI GTX 980 Gaming 4GB (only one installed atm)
4x4GB HyperX Predetor 2400 MHz
Samsung 850 PRO 256GB

I tried to boot this build for the first time, everything turns on but I immediatly have a blank screen. On the LED on the motherboard is number '67' I saw it briefly change to '68' but went back to '67' and stayed there.

Is this why I am getting a blank screen? Can anyone help me with this please? Thanks.

EDIT: I forgot to mention the power turns on, ot automatically restarts once after ~10-15 seconds.
 
Sort by date Sort by votes
I tried with one memory stick in DIMM1 and it works. I tried each memory stick single channel in DIMM1 and it works, so my modules should be fine.

Then I tried, triple channel using DIMM 1,3,5, did not work, again I got error '67' showing. I tried dual channel using DIMM1,5 and same thing, not working same error code.

I am about to do a BIOS update to see if this changes anything.
 
Upvote 0 Downvote
Well I updated to the latest BIOS from MSI website. And I have tried 2 memory sticks using DIMM 1,5 and I still get blank screen, but now error code is '04'
 
Upvote 0 Downvote
Bios I am using 17.5.

I have managed to get 2 DIMMS working when I use DIMM 1,3. If I try DIMM 1,5 it wont boot again with error code '04'.
 
Upvote 0 Downvote
Ok this is strange, I switched from BIOS A to BIOS B, now I can boot up with all 4 modules in quad channel, DIMM 1,3,5,7.

BIOS B is in the original 17.0 version though, I don't understand why BIOS B boots but A does not.

Should I keep using BIOS B? and update it? A has already been updated before when I was having problems.
 
Upvote 0 Downvote
shadow85 said:
Ok this is strange, I switched from BIOS A to BIOS B, now I can boot up with all 4 modules in quad channel, DIMM 1,3,5,7.

BIOS B is in the original 17.0 version though, I don't understand why BIOS B boots but A does not.

Should I keep using BIOS B? and update it? A has already been updated before when I was having problems.
Click to expand...

try flash bios A [with 17.5] who doesn't boot with attached one .H62
then see how its goes
 

Attachments

  • H62.rar
    5.3 MB · Views: 484
Upvote 0 Downvote
Well I tried your BIOS .H62 on my BIOS A and it still will not load anymore than single channel, however my vanilla BIOS B is still bootable with any channel. Im not sure what to do.
 
Upvote 0 Downvote
Also I should mention, that when I am in BIOS B menu, sometimes when I try to exit the screen will freeze and not move from it, I have to hard RESET. This makes me wonder if my board is bad.
 
Upvote 0 Downvote
Ugh, now I have tried to change XMP profile from 'default' to '1' and then saved while in BIOS B, and now it will not boot BIOS B.

I give up now, so many problems with my build...
 
Upvote 0 Downvote
I sent mine in for RMA, only thing I can think of is that it was the BIOS update that caused this to fail that bad as nothing else changed on my system.
 
Upvote 0 Downvote
I will let you know how mine works out, just got a notice it arrived today so a few days will tell what they say.
Really hope Newegg does not try to blame this crap on me.
 
Upvote 0 Downvote
Well my seller has recieved my board and has verified my problems which they cannot fix, so I am guessing I had a faulty BIOS, most likey your case aswell.

They are going to send me a replacement when they have more in stock, bloody sold out.
 
Upvote 0 Downvote
Back
Top