Can you sli the MSI GEFORCE GTX1080 TI GAMING X TRIO ?

[leife128c02a1]

bought 2 MSI GEFORCE GTX1080 TI GAMING X TRIO card but cant find any info on sli in nvidia setup. only the first card shows in bios (rog strix z390-f gaming)

 

[Svet]

The card support 2 Way SLI.

 

[leife128c02a1]

The nvidia settings dont show it enabled, and neither other benchmark software. My motherboard support it too

 

[Svet]

That's some board issue, check your board manual how to setup it correctly.

 

[leife128c02a1]

ROG STRIX Z390-F GAMING
Supports NVIDIA® 2-Way SLI™ Technology

 

[savormix]

ROG STRIX Z390-F GAMING
Supports NVIDIA® 2-Way SLI™ Technology

If you need help for something that cannot be resolved by the information provided in the manual (e.g. the MB is not working as expected), then please direct questions to the proper support forum: https://rog.asus.com/forum/

 

[leife128c02a1]

This is what I get for 1 of the card I have.

 

[leife128c02a1]

Here is 2 cards in

 

[leife128c02a1]

both cards work in windows, tested 1 at a time or both in, but only 1 off the cards shows up in bios, single or in pair.

 

[Nichrome]

Then it's clearly and issue with the board. Check with ASUS.

 

[leife128c02a1]

I don't think it is the board. It dosent matter which slot i put the non bios card in, it get the same resultat.

 

[DonMcK]

Could it be PSU isn't up to powering the 2 cards?

Have you tried using HWInfo to check?

 

[leife128c02a1]

It's a corsair 1000w, so that is in recomended power. HWInfo file of the not show bios card below. I only have that card in for now.

 

[flobelix]

Contact ASUS as said already. If both cards work individually it is a board issue.

 

[leife128c02a1]

What is the board to do with a card that is not shown in bios, the other card shows fine. if I have the working card (the card that shows in bios) it is the only card that shows in bios. both in single and pair setup. The other one is not shown either way.

 

[flobelix]

Do both cards show and work fine in the same slot individually when used alone?

 

[leife128c02a1]

The bad card do not show up in any slot, single or in pair in bios. the working cards shows just fine anywhere in bios as you can se in the pictures . I have tested to switch them around . They work in windows tho. I have the bad card in now in single and it work fine, but I can't get it to be in SLI mode when bios don't recognize it.

 

[Alan J T]

The bad card do not show up in any slot, single or in pair. the working cards shows just fine anywhere. I have tested to switch them around. In bios as you can se in the pictures. They work in windows tho.

Then get the bad card replaced

 

[flobelix]

Indeed the card is obviously bad then