Cant enable XMP in BIOS

[louie.deluca2128d02a8]

I just purchased a GP66 Leopard 11UH-032. Advertised 3200hz, running at 2000hz. I want to enable XMP but the BIOS is extremely limited. I found that I can unlock an "expert mode" with right cntrl+right shift+left alt+F2. it opens a different mode but there is no memory option and no profiles to enable XMP. Any help is greatly appreciated

 

[seba84_2005]

This path is where is xmp. If you do not have xmp yours memory don't support xmp.

 

[Deleted member 663924]

some notebooks is little crippled on this setting

when have bootloop or blackscreen after XMP profile - 45S power button when run "CMOS RESET"
next time try add small offset on SA "uncore" +50mV and verify "11th" VCCIO2
IO2 + SA - more stability for ram

 

[Deleted member 663924]

not all ram is possible use on 3200MHZ !
here depends on BANK /RANKS /SLOT USAGE ,.,.and MEMORY QUALITY "compatibility"

here must use OC TAB - 2933 ,..,3200 custom profile "similar like XMP ,.but repaired"

 

[louie.deluca2128d02a8]

This path is where is xmp. If you do not have xmp yours memory don't support xmp.

I will check shortly, thank you. I hope it will, they’re crucial ballistix 32GB CL16. When I run cpu-z they’re running at 1200MHz after I installed them

 

[louie.deluca2128d02a8]

not all ram is possible use on 3200MHZ !
here depends on BANK /RANKS /SLOT USAGE ,.,.and MEMORY QUALITY "compatibility"

here must use OC TAB - 2933 ,..,3200 custom profile "similar like XMP ,.but repaired"

I will check shortly, thank you. I hope it will, they’re crucial ballistix 32GB CL16. When I run cpu-z they’re running at 1200MHz after I installed them

 

[Deleted member 663924]

1200 --2400mhz "this is bad !"
no XMP - SPD - 1333 "2666mhz or more here"

edit ,. CPU-Z
memory SPD - 1.2V "no XMP" .,faster possitible CL profile -lower is better
memory tab - actual speed / timings

 

[louie.deluca2128d02a8]

This path is where is xmp. If you do not have xmp yours memory don't support xmp.

I was able to enable it, but it looks like it did not do much... What do you think?

 

[louie.deluca2128d02a8]

1200 --2400mhz "this is bad !"
no XMP - SPD - 1333 "2666mhz or more here"

edit ,. CPU-Z
memory SPD - 1.2V "no XMP" .,faster possitible CL profile -lower is better
memory tab - actual speed / timings

I was able to find the setting in BIOS and enable XMP, this is what CPU-Z says now

 

[Deleted member 663924]

this look bad or bug in cpu-z
800mhz - 1600 memory speed only " there was a similar problem somewhere "
reload bios defaults or cmos reset

you must get 1333mhz "no XMP"
or XMP - 1600mhz on MEMORY TAB

edit "optional verification"
or taskmanager - here is visible ram speed

 

[Deleted member 663924]

try HWINFO
HWINFO/MEMORY

HWiNFO - Free System Information, Monitoring and Diagnostics

Free Hardware Analysis, Monitoring and Reporting. In-depth Hardware Information, Real-Time System Monitoring, Reporting & more

www.hwinfo.com

 

[Deleted member 663924]

or wait for @seba84_2005 - has more experience with 10-11TH
and have similar device

 

[louie.deluca2128d02a8]

or wait for @seba84_2005 - has more experience with 10-11TH
and have similar device

Thank you! If clock is at 1600, does this means its running at 3200MHz?

 

[Deleted member 663924]

here is OK -3200mhz

 

[Deleted member 663924]

try SENSOR - verification GEAR MODE ?
1 - faster /2 - more compatible for higher clock