Connector Question on H61M-P23 B3

[bschmitt13]

I'm installing the H61M-P23 B3 in a Thermaltake VL8000 case. The Power LED cable coming from the front panel has a connector with 3 pin sockets (blue wire on one end, nothing in the middle, and white at the other end), but the manual for H61M-P23 B3 shows JFP1 using pins 2 and 4 for the Power LED, which are right next to each other. What am I missing? Should I leave one end hanging off the edge of the pins with the empty pin socket on pin 2?

 

[ex_forum_user_3]

Connect it to JFP2, there is also a power-led output.

 

[bschmitt13]

Thank for responding. A quick followup: on JFP2, it appears that would be across pins 1-3-5 making the pin labeled Suspend LED go to the unused pin socket? Is that correct?

 

[ex_forum_user_3]

Pin 1(-)-5(+) is used for power, it's orientation sensitive, when connected wrong turn it around.
I don't know that many cases that have a suspend-led.

 

[bschmitt13]

Exactly what I needed. Thank you very much!