Check PM.hello, i have the same issue.
I have the K360 and the display wont turn on. I have tried advanced update but the msi center software stopped at 99%.
@Svet please help me.
Thank you!
What bout any issues with the s360 and it rebooting every so often? Any reports on that?Yes, check PM.
I have exactly this same problem and I am really desperate for my Coeliquid K240 to work again as it did before installingI'm having a different problem today I booted up my pc and my mpg coreliquid k240 v2 stopped working I`ve only had it 2 months
the problem seems to be with the jusb1 header now I've checked the header connection with different devices and they work fine it keeps appearing and disappearing in devices I have even done a clean install of Windows with no luck any help would be great thanks in advance
I think all of their units are having this issue with latest updates of drivers and msi center. Because my s360 doin the same thing and my screen reboots.I have exactly this same problem and I am really desperate for my Coeliquid K240 to work again as it did before installing
And do you know when this will be solved by MSI?... Because it represents a very big problem for meCreo que todas sus unidades están teniendo este problema con las últimas actualizaciones de controladores y msi center. Porque mi s360 hace lo mismo y mi pantalla se reinicia.
[/CITA]
I think I’ve narrowed mine down to issue with driver and also Lian Li L-Connect 3 software issue conflictI'm having this same issue if someone could please advise how to fix.
Good day, I have the same problem, can anyone help me with my issue. Thank you so much.@Svet
I got same problem, i think. After downgrade from W11 to W10.
Endless loop Update in B130 Update Tool.
MSI MPG CORELIQUID K360 V2
only with this version? old msi center works ok?@Svet
Can I help me. I same the problem my MSI MPG CORELIQUID K240 It does not recognize in the system with the version of MSI CENTER 2.0.21.0
In the old versions it worked for me, it was when I updated this to 2.0.21.0 and this was days ago...only with this version? old msi center works ok?
In the end I was able to fix it but in a rather strange way... I had to run the B130 tool just at the time that Windows 11 detected my MSI MPG CORELIQUID K240 it detected it for 1 second or 2 seconds the CORELIQUID K240 liquid cooling, only in that short time, the tool could be executed and applied the BIOS flashing in order NUC126 -> M481 -> SPI FLASH... I think it is a strange problem but as I say in the end after many tests I have found the solution. In the end I have been able to move to the versions v.0AOC, V.0A05 and v.0A05... but as I say in a very determined way since the system left very little time to detect the unit to apply these updates. Now MSI CENTER shows me the CoreLiquid tool and everything works correctly in the versionAnd if you install the older version, does it start working again?
Which version was your older version where it worked fine?