Custom 3D Printed Dock Interest?

darkhawk

darkhawk

Well-known member
GENERAL OF THE ARMY
Joined
Nov 20, 2012
Messages
17,262
So.....question for all those lucky MSI Claw owners....

Who would be interested in a 3D Printed Dock?

I've been considering designing one in CAD, and then providing somewhat of a tutorial, along with a list of purchasable items, to more or less create your own, custom, MSI Claw dock with extra cooling built into it?

This wouldn't be for use while mobile, persay, but more so while you're stationary, at a disk with a keyboard/mouse/monitor......That's always been what I've wanted to design and do.
Would that be of interest to others here? If so, maybe I'll consider whipping up a design this week or next......
 
I'm quite interested in this design, but unfortunately, most of the time I play Claw while mobile, so this dock might not be suitable for me.
 
darkhawk said:
So.....question for all those lucky MSI Claw owners....

Who would be interested in a 3D Printed Dock?
Click to expand...
sounds fun. any particular ideas in mind?
like kickstand style or more like a base station?
 
Jona67 said:
sounds fun. any particular ideas in mind?
like kickstand style or more like a base station?
Click to expand...
No kickstand, becomes too complicated, routing air, etc....
My idea is to use higher flowing fans, and make the dock have a 'decent' seal around the Claw, so it can force more air through the system than the built in fans can by themselves. I've done similar for my laptops with pretty good success so far, but that style idea kinda kills the whole 'kickstand' type idea.
I also want to find a 'dock' that's relatively cheap, that I can take apart, and use inside my dock, to basically give it USB PD, as well as some USB ports, and a HDMI output or two.
 
Back
Top