Digivox micro hd won't receive all freeview channels

dusty9

New member
PRIVATE E-2
Joined
Oct 5, 2010
Messages
2
Hi, I recently purchased a digivox micro hd tv tuner but it doesn't seem to pick up all the channels.

It was detected without problems on windows 7 64bit and the drivers were installed without any problems.

Windows Media Centre detects the tuner as a Digital Antenna (DVB-T) (1 Tuner)

However it does not receive all the freeview channels such as itv1, itv2, itv+1, c4, c5, e4, more4. Yet it will receive bbc1, bbc2, itv3, itv4, e4+1, film4, fiver, five usa and many others with perfect signal.

The aerial used is in exactly the same position that received a perfect signal for every channel for my freeview box for my tv. I have used the ScanChannelsBDA which showed 100% Signal Quality for all the channels it found but did not find the channels mentioned above that did not show up in WMC.

Any help in receiving these channels? I live in Northern Ireland but there has been no problem before in receiving reception.

Thanks
 

Stu

New member
GENERAL OF THE ARMY
Joined
May 25, 2004
Messages
19,551
Try using a signal booster and/or adjusting the position of the aerial.
 

dusty9

New member
PRIVATE E-2
Joined
Oct 5, 2010
Messages
2
Yeh I've just tried using a signal booster but still no luck.

Tried moving the aerial around but it still doesn't receive them.

The aerial signal receives a perfect signal for the freeview box so I don't think it is the signal that is at fault.

Thanks for helping
 

Deefer

New member
PRIVATE E-2
Joined
Feb 25, 2012
Messages
1
has anyone come up with a solution to this yet. I too have the same issue with a perfect signal on my FreeView TV but using this device with the same aerial doesn't find any of the same channels listed in the original post. Is there an issue with these channels and this device?

thanks
 

Stu

New member
GENERAL OF THE ARMY
Joined
May 25, 2004
Messages
19,551
Have you tried with a signal booster?
 
Top