Eclipse SLI issue with OCZ SSD

[mrbloody369]

I have been trying to install windows 7 on my SSD: OCZ agility 60 gig sataII , and fails every time.

I have confirmed it not the install disk / memory / switching sata cable's

Other strange issue is every time I attempt to install windows 7 on the ssd it error's up 0X80070002 i did go to m$ web site and search the error and ran the FIX IT tool, and attempt again with fail same error code... Another strange issue every time I attempt to install w7 after it error's out and i reboot the motherboard doesn't see the ssd any more and the only was to see it is run a repair on windows 7 and it will see the install but not the hdd to install it on.. (After I disconnect the sata cable and reconnect it, then it see's it again)

Any Idea;s my last resort is attempting a "Windows 7 ? VHD Boot" on it.

 

[mrbloody369]

Mounting the img on the ssd went good but attempted to install the os in the vhd failed like it does every time with same error 0x80070002..

Really starting to bang head off desk trying to think of trying next..

 

[HU16E]

Suggest to open a ticket with MSI Tech Support, it may be a compatibility problem of some kind. Have you checked with the OCZ forums?

* Cold Storage - WD SATA 6

Added: Just curious. Is this a SATA III 6Gb/s drive? Do you have it jumpered for 3GB/s operation? Or is it a SATA II 3Gb/s WD connected to SATA port 6?

 

[mrbloody369]

Ya and their is no same issue's reported with the combo of the moby and ssd I'm using

 

[HU16E]

I have confirmed it not the install disk / memory / switching sata cable's

Is it possible to try the SSD on another system? To completely rule out the SSD itself as being in some way faulty?

 

[mrbloody369]

Added: Just curious. Is this a SATA III 6Gb/s drive? Do you have it jumpered for 3GB/s operation? Or is it a SATA II 3Gb/s WD connected to SATA port 6?

"WD Caviar Black 1TB SATA HD 7200/64MB/SATA-6G "bought from tigerdirect iteam number no longer brings up any info(as usual)

Is it possible to try the SSD on another system? To completely rule out the SSD itself as being in some way faulty?

If some one wants to supply It, I be gladly to attempt another go at it..If not every one gate to wait for OCZ to rma the sdd and send me a different one.