Fan Settings not Saving in Dragon Center (GF63 Thin 10SC)

Bioniclex6

New member
Joined
Sep 23, 2021
Messages
1
I’m having problems with my new laptop, MSI GF 63 Thin 10SC, where whenever I turn it off my laptop, the saved fan settings in Dragon Center are reset. The issue is that the default fan-curve allows for the laptop to overheat considerably under load, hitting up to 93° C. I don’t see any settings in the BIOS to alter the fan curve, but Dragon Center does not seem to be working automatically, and I’d like some way to have a custom fan-curve be applied automatically at boot. Is there a way to easily fix this issue in Dragon Center, or is there any other software/BIOS setting that can also control the fan-curve settings? Thanks for the help!
 

hchg

Active member
LIEUTENANT COLONEL
Joined
May 27, 2014
Messages
1,600
You should be able to set the fan curve in MSI Dragon Center, the setup option is not as powerful as the motherboard version, but it's good enough to me.
Fan curve settings
I only set the minimum fan speed down to zero as I can't stand the fan noise in the office.
 

next3r

Well-known member
MAJOR
Joined
Jun 22, 2018
Messages
4,524
in bios not exist setup ,,.EC control this
in dragon - custom fan curve ? "or any profile + advanced and fan curve"

if you need faster end - last two points 100./. or 150./. - cooler booster around 87-90C "best for performance"
94C - starts prochot "sw breake" - for most cpu 800mhz drops "need fast monitoring"

edit ,,.fan curve example
20-20-50-50-60-100 "20-20 slower idle 1200rpm "lower sensitivity" // 50 target is 3000rpm for gaming usage "no noise" // 60-100 - fast end + max rpm"
20-30-50-60-100-100 "normal curve "raising by usage"//100-100 faster end for cooling under 90C"

keep in mind, that cooling does not only cool the CPU / GPU
the whole system needs circulation

////
some like this must find in DRAGON CENTER


/or try lower cpu ratio + small undervolt
good luck

edit
 
Last edited:

next3r

Well-known member
MAJOR
Joined
Jun 22, 2018
Messages
4,524
MSI GF 63 Thin 10SC
dragon from windows store !
 
Top