Hello
1. What should I do to disable "Restore On AC Power Loss", I set it to OFF in BIOS but still it`s working. I tried many BIOS even the newest beta 1A5 that I received form support to resolve other issue and still nothing!
2. Is there someone who plug addnational fans to MB/sysfan as I have strange behaviour with mine, they start to working for a second and stops till post where they start to work again, I don`t believe it`s normal.
3. Which AHCI Sata driver should I install for GD65, INTEL 5 series/3400 series SATA AHCI Controller or Intel 5 series 6 port AHCI sata Controller.
4. Problem with Vdrop and autorising Vcore:
When I set manually Vcore to 1.201V and Vdroop to LOW, during load Vcore increase to ~1.2760V(checking with Voltmeter)
But when I set Vdrop to HIGH, during load Vcore is drooping from 1.201V to ~1.120V.
I`m not to only one to have this as I found other ppl with the same issues.
I hope someone could answer me to this questions.
1. What should I do to disable "Restore On AC Power Loss", I set it to OFF in BIOS but still it`s working. I tried many BIOS even the newest beta 1A5 that I received form support to resolve other issue and still nothing!
2. Is there someone who plug addnational fans to MB/sysfan as I have strange behaviour with mine, they start to working for a second and stops till post where they start to work again, I don`t believe it`s normal.
3. Which AHCI Sata driver should I install for GD65, INTEL 5 series/3400 series SATA AHCI Controller or Intel 5 series 6 port AHCI sata Controller.
4. Problem with Vdrop and autorising Vcore:
When I set manually Vcore to 1.201V and Vdroop to LOW, during load Vcore increase to ~1.2760V(checking with Voltmeter)
But when I set Vdrop to HIGH, during load Vcore is drooping from 1.201V to ~1.120V.
I`m not to only one to have this as I found other ppl with the same issues.
I hope someone could answer me to this questions.