Forum UEFI Shell Flash tool [V1.57] for MSI boards! ✔

Svet

Well-known member
Administrator
Joined
Nov 20, 2003
Messages
82,869
1724015935636.gif


log2.png


Download tool from the link:
>>> Latest Forum UEFI Shell Flash tool <<<


This tool will allow automated flashing MSI boards from UEFI Shell.

Important:
Do NOT use it on a MSI AMD boards from 3
xx boards Series. [like X370/B350]

(its OK to use for X399 and A320, AMD models as 3xx exception)

It's OK to use for any other newer than [X370/B350] MSI AMD boards or Intel boards.



16mb.jpg


32mb.jpg



u6KCDQh.jpg

V1.13 Add extra support for ME FW Update for all MSI Z490 Series:
MPG Z490 CARBON EK X
MEG Z490 UNIFY
MEG Z490I UNIFY
MPG Z490 GAMING CARBON WIFI
Z490-A PRO
MPG Z490 GAMING EDGE WIFI
MPG Z490 GAMING PLUS
MAG Z490 TOMAHAWK
MEG Z490 GODLIKE
MEG Z490 ACE
MPG Z490M GAMING EDGE WIFI

V1.31 Add extra support for FW for Raptor Lake boards for all MSI Z790 Series:
PRO Z790-S WIFI
MPG Z790 CARBON WIFI
MPG Z790 EDGE WIFI DDR4
MAG Z790 TOMAHAWK WIFI DDR4
MPG Z790 EDGE WIFI
MAG Z790 TOMAHAWK WIFI
Z790 GAMING PRO WIFI
Z790 GAMING WIFI
MPG Z790I EDGE WIFI
PRO Z790-P DDR4
PRO Z790-P WIFI DDR4
PRO Z790-P
PRO Z790-P WIFI
PRO Z790-A WIFI DDR4
PRO Z790-A WIFI
MEG Z790 GODLIKE
MEG Z790 ACE

Updated tool version to V1.32
* Minor optimisations
* Added mini display status, with current status and detected numbers of USB devices in the system.
* Updated ME-FW for Z490 Series to 14.1.70.2228 (released BIOSes few days ago by MSI after ~2 years from prevision FW update to handle latest security fixes and vulnerabilities)

Updated tool version to V1.33
* implement self update feature
* a lot of performance and memory optimizations
* hundreds of other small tweaks, improvements, code refactoring

1.png


2.png



Updated tool version to V1.34
* minor refactoring
* updated self-crafted ME-FW for MSI Z790 boards to 16.1.30.2264

Updated tool version to V1.35
* minor bug fixes. [sometimes in rare case was possible to throw error msg. while preparing the USB key]

Updated tool version to V1.36
* updated and patched 2nd flasher
* add support for B650 & X670 board Series
* applied different optimizations and improvements.

Updated tool version to V1.37
-add enhanced flash support[ME-FW Flash] for B760 Series:
MPG B760M EDGE TI WIFI
MPG B760I EDGE WIFI
MPG B760I EDGE WIFI DDR4
MAG B760 TOMAHAWK WIFI
MAG B760 TOMAHAWK WIFI DDR4
MAG B760M MORTAR MAX WIFI
MAG B760M MORTAR MAX WIFI DDR4
MAG B760M MORTAR WIFI
MAG B760M MORTAR
MAG B760M MORTAR WIFI DDR4
MAG B760M MORTAR DDR4
MAG B760M MORTAR WIFI II
MAG B760M MORTAR II
PRO B760-P WIFI
PRO B760-P WIFI DDR4
PRO B760-P DDR4
PRO B760-VC WIFI
PRO B760-VC
B760 GAMING PLUS WIFI
PRO B760-P DDR4 II
PRO B760M-A WIFI
PRO B760M-A WIFI DDR4
PRO B760M-A DDR4 II
PRO B760M-A DDR4
PRO B760M-P
PRO B760M-P DDR4
PRO B760M-G
PRO B760M-G DDR4
PRO B760M-B
PRO B760M-E
PRO B760M-E DDR4

Updated tool version to V1.38

*Updated self-crafted ME-FW for Z790 and B760 boards from 16.1.30.2264 to 16.1.30.2330

Updated UEFI flash-tool version to V1.39
  • * Fixed issue for Z490 Series:
    • - Unable to perform ME-FW update if the current installed ME-FW version is too old [like: 14.0.xx.xxxx]
  • * Modify Multi tank update to do not flash Non Boot part, if the target platform ID is different or not updated successful.

Updated UEFI flash-tool version to V1.40
  • - Fixed issue: Boot to shell unable to map USB key if they are too many devices in the system.
    • - Add: Display AGESA version for supported BIOS files.
    • - Minor improvements.
    • - Minor GUI update.

Updated UEFI flash-tool version to V1.41
  • * Update: Extend AGESA support detection.
  • * Add: Display Intel ME-FW version for supported BIOS files. [different bases in different colours]
Updated UEFI flash-tool version to V1.42
  • * Update: Optimize and speed-up detection for AGESA & Intel ME-FW
    • * Update: Secondary flasher
    • * Add: Add support for additional custom flash command for 256MBit Intel BIOSes

Updated UEFI flash-tool version to V1.43
  • * Fix: Fixed issue unable to overwrite target if the read only flag has been set
    • * Add: Add Intel ME-FW flash support for Z690 Series:
    • MEG Z690 GODLIKE
      MEG Z690 ACE
      MEG Z690 UNIFY
      MEG Z690 UNIFY-X
      MEG Z690I UNIFY
      MPG Z690 CARBON WIFI
      MPG Z690 CARBON EK X
      MPG Z690 FORCE WIFI
      MPG Z690 EDGE WIFI
      MPG Z690 EDGE WIFI DDR4
      MAG Z690 TOMAHAWK WIFI
      MAG Z690 TOMAHAWK WIFI DDR4
      MAG Z690 TORPEDO
      MAG Z690 TORPEDO EK X
      MAG Z690M MORTAR WIFI
      PRO Z690-A WIFI
      PRO Z690-A
      PRO Z690-A DDR4
      PRO Z690-P WIFI
      PRO Z690-P DDR4

Updated UEFI flash-tool version to V1.44
  • * Optimize: ME-FW detection related to system info [not related to flash ME-FW detection]
  • * Improve: Fix ME-FW 14.xx detection "not found" issue to specified class BIOSes [not related to flash ME-FW detection]

Updated UEFI flash-tool version to V1.45
  • * Minor bug fixes

Updated UEFI flash-tool version to V1.46
  • * Fixed rare issue: pressing enter multiple times while loading bios sometimes shows a new empty form.
  • * Fixed issue: Browse for BIOS file appear at left side and dialog position always reset at next execution.
  • * Improve USB BIOS guard handle.
  • * Minor GUI update
  • * Other minor internal optimizations.
  • * Add: Add Intel ME-FW flash support for B660 & H670 Series:
    • -MAG H670 TOMAHAWK WIFI DDR4
      -MAG B660 TOMAHAWK WIFI
      -MAG B660 TOMAHAWK WIFI DDR4
      -MAG B660 TOMAHAWK EVA e-PROJECT
      -MAG B660M MORTAR MAX WIFI DDR4
      -MAG B660M MORTAR WIFI
      -MAG B660M MORTAR
      -MAG B660M MORTAR WIFI DDR4
      - MAG B660M MORTAR DDR4
      -MAG B660M BAZOOKA
      - MAG B660M BAZOOKA DDR4
      - PRO B660 - A
      - PRO B660 - A DDR4
      - PRO B660M - A WIFI
      - PRO B660M - A WIFI DDR4
      - PRO B660M - A
      - PRO B660M - A DDR4
      - PRO B660M - A CEC WIFI DDR4 V2
      - PRO B660M - A CEC WIFI DDR4
      - PRO B660M - VC WIFI DDR4
      - PRO B660M - P WIFI DDR4
      - PRO B660M - P DDR4
      - PRO B660M - G
      - PRO B660M - G DDR4
      - PRO B660M - B
      - PRO B660M - B DDR4
      - PRO B660M - E DDR4​
    • Updated UEFI flash-tool version to V1.47​
  • * Add: Display Tool's Intel ME-FW Flash Versions
  • * Add: Visual indicators when supported BIOS file is loaded in compare to tool's FW Flash versions:
  • - flashing orange if the BIOS ME-FW is lower that tool's FW flash version.
  • - flashing green if the BIOS ME-FW is the same as tool's FW flash version.
  • - flashing light blue if the BIOS ME-FW is higher than tool's FW flash version.
  • * Update Intel ME-FW Flash image for Z790, Z690, B760, B660, H670 Series to 16.1.30.2361
    • Updated UEFI flash-tool version to V1.48
  • * Add flash Intel ME support for PRO Z790-A MAX WIFI.
  • * Add flash support for MPG X570S CARBON MAX WIFI.

Updated UEFI flash-tool version to V1.49
  • * Appy totally different .efi solution for the issue "too many bios file". [The issue should be totally solved now and no longer happens.]
  • * Updated internal assembly modules.
  • * Code refactoring and minor optimizations.
  • * Add flash Intel ME support for newest released Z790 mainboards:
    • -MEG Z790 GODLIKE MAX
      -MEG Z790 ACE MAX
      -MPG Z790 CARBON MAX WIFI
      -MPG Z790 CARBON MAX WIFI II
      -MPG Z790 CARBON WIFI II
      -MPG Z790 EDGE MONSTER HUNTER EDITION
      -MPG Z790 EDGE TI MAX WIFI
      -MAG Z790 TOMAHAWK MAX WIFI
      -Z790 PROJECT ZERO
      -Z790 GAMING PLUS WIFI
      -PRO Z790-P II
      -PRO Z790-VC WIFI

Updated UEFI flash-tool version to V1.50
  • * Updated and re-arranged GUI (including changes for more easy text reading).
  • * Fixed some minor typos related to error messages.
  • * Update Intel ME-FW Flash image for Z790, Z690, B760, B660, H670 Series to 16.1.32.2473
  • * Add new feature: Display Raptor Lake-S B0 CPU's uCode version for supported BIOSes.

  • Updated UEFI flash-tool version to V1.51
  • Fixed bug in .efi module causing func callback's issue in some cases.


  • Updated UEFI flash-tool version to V1.52:
    • * Update .efi detections.
    • * Update other assembly modules.
  • Older version V1.33 and above can self-update to the latest one

  • Updated UEFI flash-tool version to V1.53
    • * Updated Intel ME-FW flasher for Raptor Lake supported boards.
  • Updated UEFI flash-tool version to V1.54
    • * Updated and patch the secondary flasher.
Updated UEFI flash-tool version to V1.55
  • * Improve async operations when preparing the USB key

  • Updated UEFI flash-tool version to V1.56

    • * Improve compatibility with msi's Corsair prebuilt units [thanks to 'fireboy7050159d02de' for reporting & testing]
    • * Updated internal assembly modules

  • Updated UEFI flash-tool version to V1.57
    • * Updated internal assembly modules /sys lang modules/
    • * Updated replacer module (part of build-in self updater)
    • * Add support for newest msi AMD BIOSes formats: 9.4
    • * Updated .efi & shell script modules
    • * Add support for newest MSI AMD platform boards:
      • - X870 GAMING PLUS WIFI
        • - MEG X870E GODLIKE
          • - MAG X870 TOMAHAWK WIFI
      • - PRO X870-P WIFI
      • - MPG X870E CARBON WIFI

-------------
1656453919586.jpg

1656453919547.jpg

1656453919527.jpg


How to use:
Prepare an USB key and format it in FAT32

Short guide for now:
1. Run UEFI_Flash_Tool_Installer.exe
2. Select your MSI BIOS File ["Load MSI BIOS File]
load_1a.png

3. Select your USB key drive [from drop down menu, if the USB key is not listed click "Refresh" button]
usb_select.png

4. Click "Create USB Flash key" and wait to finish.
click_to_create.png

under_preparation.png

done.png


Next reboot computer,
and ensure in BIOS Setup:
UEFI Boot is allowed,
and Secure Boot disabled.

After exit from BIOS Setup while computer is booting:
You can press F11 during BIOS post/logo screen, then when BBS popup after a while,
choose the prepared USB key with UEFI in front as name.
i.e: choose to boot from:
UEFI USB your drive

then wait, and you will see the BIOS version shown that is going to be flashed.
and you can press a key to proceed with flashing.
If you don't want to proceed with flashing,
you can press "q" to abort at that point.

when flashing starts,
wait patiently to finish,
ensure successfully message on the screen then reboot or power off the computer.


Optional feature: [Patch AMD BIOS for CP_Flash]
This will allow cross-platform flashing to 32MB BIOS from 16MB BIOS for boards with 256Mbit BIOS chip.
The tool will auto detect if the BIOS support such feature and then will Enable that option.
[in a case when board was flashed to the wrong BIOS to help, restore correct BIOS]
CPFlash_select.png

cpf_warning.png

cpf_in_progress.png

View attachment 168805



Or use special version for Blind Flashing only:
(It's useful when need to flash BIOS without display [but the PC can still boot and works fine] and performs auto flashing)
For Blind Flashing only: Forum UEFI Shell Flash tool [V1.32]

Short instructions for for Blind Flashing:
[prepare the USB key for flashing,[use the same steps to prepare it as above] then shutdown the PC,
and disconnect temporary any other storages except that USB key that will be used for flashing]
Then turn on PC and wait auto flashing to start and finish automatically.
[when blind flashing is complete the PC will auto shutdown,
then you can remove the USB key and reconnect the rest of your storages and turn it on]


Note1: Be sure to place only one BIOS file on the USB key at the time, before proceed with flashing.
Note2: Due BIOS flashing nature, (which consider every flashing as potential dangerous)
Flash and use at own risk as usual.

Note3: You can use it to downgrade the BIOS too.
Note4: You can cross-platform flash back to correct BIOS 32MB bios. (if the board been flashed to the wrong BIOS by mistake)

EDIT: A video how to use guide made by user efmled:

efmled date=1563998092 said:
I wanted to Thank you Svet very much! You saved many nerves to lot of people! Tool is great! I managed to downgrade my A.90 BIOS on X470 Gaming Plus MB to A.60. And I also created a video tutorial of how to do it. And put the link to this topic in video's description. if somebody is interesting in. Video has two languages text explanation Russian and English.
efmled date=1563998092 said:
You can attach the link to your top message in this discussion theme. :) Thank you Again !
Here is the link to video:

[youtube]
 

Attachments

  • aa_Screenshot 2023-01-27 211418.png
    aa_Screenshot 2023-01-27 211418.png
    43.2 KB · Views: 5,285
  • Screenshot 2023-04-24 192122.png
    Screenshot 2023-04-24 192122.png
    48.9 KB · Views: 2,736
  • 3a.png
    3a.png
    62.3 KB · Views: 3,754
  • log0.png
    log0.png
    57.6 KB · Views: 4,728
  • log1.png
    log1.png
    57.1 KB · Views: 4,771
Last edited:
@nkyadav

E0? E3? Those are unknown to me
Can you tell full BIOS ID of those?



You mean dual BIOS?



I'm confused what is E0 , E3 and what you call "slot. Can you clarify better?
Dual slot == dual BIOS, with a switch to select one or the other.

As for E3 versus E0 - the MSI X570 GODLIKE UEFI fw versions come in major version like follows: 7C34v1E. The 1E is the designation for the major revision, with a following number (1,2,3, etc.) for Beta and 0 for the final release.

Currently, for example, there is a new 7C34v1F1 (Beta version), but the last stable release is 7C34v1E, which, when extracted, has a name E7C34AMS.1E0.

The actual file names are as in my screenshot:

01.png

When I sent a message to MSI support, they automatically generated an RMA for the board, but want 15-30 days turnaround, and I don't have a backup system and cannot afford the downtime right now. So, I was hoping that your utility might offer some recourse to allow me to get both 'BIOS' working correctly.

The worst part is that I used the latest MSI Center 1.0.24 to download and apply the E7C34AMS.1E0 fw update over E7C34AMS.1E3, which rebooted the machine and ran the M-Flash utility as it is supposed to - but it froze for well over 3 hours, as mentioned, and I had no recourse but to reboot (I had some really bad thunderstorms moving into the area and I decided to take my chances with the UEFI fw update being incomplete versus leaving my computer on during the storms).

I hope that helps explain what I mean. If I need to provide more info, please let me know and I will.
 
Hello dear SVET and thanks for all the help. I have purchased your tool for set up EC parameters. Now i got some problems with mainboard. I got B450 bios on X470 board and its max version. Is there some tool to apply it to X470? I have purchased the board with this bios. Board is MS-7B79 and its X470 gaming plus max. Thanks and sorry for my english.
 
Hello,
Now i got some problems with mainboard. I got B450 bios on X470 board and its max version.
Is there some tool to apply it to X470? I have purchased the board with this bios.
Board is MS-7B79 and its X470 gaming plus max. Thanks and sorry for my english.

You can use the tool in this topic to cross-flash and re-flash to correct BIOS if that's what you mean,
direct link:
and instructions are in the 1st post.
Link to the latest and correct BIOS for X470 gaming plus max:
 
How is that on h110 mobo when using afudos there is an error when /me command is issued ?

It says somthing like "this bios does not support entire me flashing"

I have no problems flashing me region as well as bios one using m-flash or FPT tool or even Flashrom under linux but afudos always fails with me region. Why is that?
 
This tool is a lifesaver for me and it works on MSI Z370 Gaming M5 (7B58) like a charm. Did manage to flash my mobo with latest beta bios (7B58v1B2). The genuine M-flash tool stops working and don't know why. Just a black screen after reboot and so on. Stupid boot loop black screen restart crap thing... only Cmos reset helped but no flash then. This little software did the trick an reminded me the times when the easiest, best and simplest way that always works was the DOS method :).

Big thanks!
 
Hi there,
I have a Medion PC with an MSI z490 gaming edge wifi mainboard (MS-7C79 ver.1.1) with an OEM firmware from Medion (E7C79W0X.205) can I replace this version with the UEFI v1.16 tool to the retail version? The new BIOS version supports Win11 according to the homepage. (Version E7C79IMS.1A0) Thank you very much !!
 
Hi there,
I have a Medion PC with an MSI z490 gaming edge wifi mainboard (MS-7C79 ver.1.1) with an OEM firmware from Medion (E7C79W0X.205) can I replace this version with the UEFI v1.16 tool to the retail version? The new BIOS version supports Win11 according to the homepage. (Version E7C79IMS.1A0) Thank you very much !!

If you want to cross-flash at own risk, yes you can. Else check with your OEM vendor for updates.

If you plan to use the tool for cross-flashing,
for this particular case to match the ME-FW version,
do a step update as follows:
1st Update with the forum flasher tool to BIOS version 1.3:

and when its done, do a 2nd flashing this time with M-Flash to the latest version 1.A:
 
Hello Svet!

Thank you for your reply! Can I also use the version https://download.msi.com/bos_exe/mb/7C79v16.zip with the MSI UEFI Flashtool V1.16? I have installed an 11th Gen Intel Processor (11900KF). My concerns are that afterwards with version 1.3 the CPU is no longer recognized. I will give my OEM vendor another chance to make improvements. But if that doesn't help, then I have to install this retail bios myself! Is the MAC address WLAN + LAN saved on another chip? Best regards Mario
 
That tool works for laptop @Svet
I need to upgrade to 60H version for support EFI

Thanks
 
Last edited:
Thanks @Svet for your time and answer!
But can you tell me some path or tool for do this process that a need to do for support UEFI in my old laptop[CR41_0M] at my own risk?
I mean, I want to flash a 60H version of BIOS, that is for W8 and with UEFI support in my board.
Best regards
 
Hello Svet!

Thank you for your reply! Can I also use the version https://download.msi.com/bos_exe/mb/7C79v16.zip with the MSI UEFI Flashtool V1.16? I have installed an 11th Gen Intel Processor (11900KF). My concerns are that afterwards with version 1.3 the CPU is no longer recognized. I will give my OEM vendor another chance to make improvements. But if that doesn't help, then I have to install this retail bios myself! Is the MAC address WLAN + LAN saved on another chip? Best regards Mario

Hello Mario,

I have the same pc like you, with the same problem. Can you tell me if the cross flash works with the tool?

thanks!
 
@Svet

Can you please help me what to do? I have the same problem as Mario, above here.
I have a pre installed mpg z490 gaming edge wifi. But im missing a lot of features on this MB. So I want It to flash like its an normal board with the original MSI bios software.

If I want to update the bios like the normal way, the files wont show up, wich is a common problem because of the pre installed bios/medion software.
Thanks in advance
 
You can flash/cross-flash to desired BIOS [at own risk]
just make sure the new BIOS will support your hardware.
 
You can flash/cross-flash to desired BIOS [at own risk]
just make sure the new BIOS will support your hardware.

Alright thanks @Svet

So from (z490 gaming edge wifi) current bios E7C79W0X.205 to newer version 7C79v18 (for z490 gaming edge wifi), should be possible with the flashtool v1.16? ''yes at my own risk.''
z490 bios driver
or should i first cross flash to v13? (as you mentioned above to supermario), and from there on to the newer ones? The latest one, version 1A is not relevant for me, because i dont use win11.
 
Check if your CPU used will be supported by that new BIOS.
 
Last edited:
Thanks for you fast reply @Svet! Really appreciate that!

according to this page from MSI, my i9 11900K is supported from version 7C79v16. That means that it minimal requires this version, and the later ones are also working (i.e v18) i guess?

So do i need to perform a crossflash to v16 first, and after that a normal flash to V18?
 
Back
Top