GF65 Disassemble cooling system

undersk156d02da

New member
Joined
Sep 25, 2021
Messages
1
Hello everyone !
I was trying to disassemble my cooling system to set a new thermal paste but it is like "locked". After removing all the screws, it is always impossible to unleash it.
I cannot find any videos where they disassemble this part.

Can any of you help me ? :)
 

Attachments

RaiderGamer

Well-known member
MAJOR GENERAL
Joined
Aug 1, 2015
Messages
3,550
if you truly have every screw removed then just pull harder. because it sticks

it should all come up / off as one piece, so prepare for that
 

badboy2k

Well-known member
Global Moderator
Joined
Feb 11, 2012
Messages
10,775
wiggle it a bit off on the end with the single heat pipe as there is alot of thermal Pads and do the same for the rest of the cooler too around the CPU and GPU as you will have Hydraulic suction that is holding the cold plates against the GPU and CPU.
 
Top