H67MA-E45(B3) BIOS won't update from 1.F0 onwards

Status
Not open for further replies.

tuomoseppala

New member
PRIVATE E-2
Joined
Mar 28, 2019
Messages
1
I'm stuck in BIOS version 1.F0 on my H67MA-E45(B3). I've done MSI Live updater up to that version but then the updater says I'm up to date.

Then I've tried to do the update manually, following MSI SOP instructions. So I extract the file (7678v32) to USB drive, launch the updater and everything seems to go just as described in SOP. But then the system just reboots and nothing has changed. I've tried this over and over with different versions and different USB drives. How I'm able to make the update happen? I've tried everything in my toolbox but I'm constantly stuck on v. 1.F0.

Any help?
 

flobelix

Well-known member
Global Moderator
Joined
Jan 25, 2007
Messages
39,439
Update to the latest version 3.2 with the below:

   A.) Download >>this archive<< and place it on your desktop. Do not decompress.
   B.) Download and install the >>MSI HQ Forum USB flasher<< .
   C.) Insert your FAT32 formatted usb stick.
   D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
   E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
   F.) Boot to the USB  
   G.) Now follow the directions and let the tool flash

Note that you must use the linked archive and nothing you downloaded from product site before.
 

paparazipapa

New member
PRIVATE E-2
Joined
Jun 25, 2020
Messages
1
I am having the exact same issue as originalposter. Even using the suggested update method above nothing changes still stuck at v.1.23.  In addition to fast start what ae the ect. Options i should have turned off? When told to restart i select the usb to boot from and windows starts normally without any changes. Apologiea just read on the tool page that osx64 isnt supported thats probably why it dodnt work
 
Status
Not open for further replies.
Top