How to turn off the blue LED on the power button

[pablosso1154802d5]

How to turn off the blue LED on the power button
In the MSI Mag Pano 100R PZ case
Holding down the LED button for 6 seconds does nothing.

I don't have the 2-pin LED cable connected.

 

[plutomate]

It looks like it has an all in one front panel connector, did you remove the power LED cable manually?

 

[pablosso1154802d5]

View attachment 205549
It looks like it has an all in one front panel connector, did you remove the power LED cable manually?

I have this connector on the JPanel
I tried to connect it, but after connecting it and clicking the LED on the case (button number 4), my computer simply resets.
It's as if it were a RESET button and not an LED

The best part is that in the case manual
This button is RESET
But on the case itself, it is labeled as LED

 

[plutomate]

yeah it happens when MSI kinda use the same case and change minor stuff and rename to a different model.
If it's for LED, then it'll have a separate 2 pin connector which goes to LED HUB that comes with the case.
but thought you meant how to turn off the power LED,

basically you wanna unplug those 2 pin.

 

[pablosso1154802d5]

yeah it happens when MSI kinda use the same case and change minor stuff and rename to a different model.
If it's for LED, then it'll have a separate 2 pin connector which goes to LED HUB that comes with the case.
but thought you meant how to turn off the power LED,
View attachment 205555
basically you wanna unplug those 2 pin.

And best part is

There is one connector xD
This new type where all is pinned together i can only cut wire if i wanna unplug

 

[badboy2k]

And best part is

There is one connector xD
This new type where all is pinned together i can only cut wire if i wanna unplug

No Need to Cut! Get a Thin Tool EG a small Screwdriver or a Pin and push it under the Clips on Each Pin and pull it out by the Wire.