I can't open voltage/frequency graph in MSI Afterburner

Status
Not open for further replies.
Joined
Aug 9, 2020
Messages
3
I tried Googling what the issue might be but didn't find any solution. Basically when pressing Ctrl + F in MSI Afterburner it should open that graph needed to undervolt just that in my case nothing happens. It worked before and out of blue it stopped working.

I have unlocked voltage control from Settings but still nothing. My GPU is GTX 1060 3GB (it's a laptop version).
 

Big mac

Big mac
SECOND LIEUTENANT
Joined
Jul 1, 2020
Messages
521
What laptop are you using?
As I know, MSI Afterburner is for the CPU Gen 4th and 5th.
So for the other laptops, it could be a compatible issue.
 
Joined
Aug 9, 2020
Messages
3
What laptop are you using?
As I know, MSI Afterburner is for the CPU Gen 4th and 5th.
So for the other laptops, it could be a compatible issue.
It's an ASUS TUF Gaming FX504GM.
It's funny because it used to work until recently, have they changed what GPUs can be undervolted?
 

next3r

Active member
MAJOR
Joined
Jun 22, 2018
Messages
1,831
afterburner for all "not only 4th and 5th"
4.6.2 is last stable ,works fine

and must working nvidia driver ,,,some optimus is DCH driver
 
Joined
Aug 9, 2020
Messages
3
afterburner for all "not only 4th and 5th"
4.6.2 is last stable ,works fine

and must working nvidia driver ,,,some optimus is DCH driver
Hi.

Installed these and MSI Afterburner still doesn't open the graph.
 

Big mac

Big mac
SECOND LIEUTENANT
Joined
Jul 1, 2020
Messages
521
Generally speaking, MSI software is only applicable to MSI products.
Does ASUS have no products with the same function?
 

next3r

Active member
MAJOR
Joined
Jun 22, 2018
Messages
1,831
afterburner for all ,,AMD ,,nvidia ,,all brands MSI ,,asus ,,HP all :p
must working driver NVIDIA or optimus igpu/nvidia

pascal up --voltage curve
check device manager -NVIDIA driver status or health status
admin ?? in your system ??

test reinstall drivers
clean afterburner files after //reinstall

hwinfo - x16 bus or gpu-Z ?? nvidia info "any missing info" -bad driver or corrupt in bios or hhw-defect

driver clean tool
last --use same version ?? DCH lot NB or check current driver
 

flobelix

Well-known member
Global Moderator
Joined
Jan 25, 2007
Messages
39,448
This forum only supports Afterburner issues as far as MSI retail products are concerned. There is no support for ASUS products no matter if using a free MSI software.

:floblock:
 
Status
Not open for further replies.
Top