I can't select the second driver to install windows even bios can see it

Yes, can you list all your hardware in detail? Then we also know which forum section this post belongs to (definitely not in "Official Announcements").

There's an issue with the bootloader here which needs to be fixed, see here for example: https://www.ninjaone.com/blog/what-bcdedit-does-and-how-to-use-it/
Or here, https://neosmart.net/wiki/easybcd/basics/

had no idea too where to put this so just threw it here till we find out what the OP Has and if you would be so kind once they have said what they have can you report it again to be moved to the correct area?
 
SATA port 1 : wdc wds500g2b0a 500gb hot plug: disable
Sata port 2: St2000dm008 2fr102 2000.3gb hot plug disabled
M2_1 Intel Ssdpeknw512gb
 
Do you see the signature under BrotherBelial's post? We need something like that. We don't even know your motherboard model.
 
Well i fking done it for a reason didn't give me to unlock the sata ports unabled.. thanks for letting informed.!
 
Well i fking done it for a reason didn't give me to unlock the sata ports unabled.. thanks for letting informed.!

what Motherboard do you Have?
What CPU do you Have?
what RAM do you Have?
What PSU do you Have?

without that we have no idea what your even using here and could be a toaster for all we Know!
 
Seems he's gotten it solved though (didn't quite understand how), i don't think we're getting that info anymore.
 
Yes i solved it didn't recognise the port's as opened.. even it shows mr are opened..
Now i done something like default settings and appeared closed after that. Im done by the way windows 🪟 are back!! 😁 😁
 
Back
Top