Imposible to achieve D65 with sRGB mod on MSI MPG 341CQPX QD-OLED

[bleakclou15b602e7]

I have tried to calibrate my new OLED with Calibrite HL Plus colorimeter in Calibrite Profiler. I can calibrate it with user mode. But when I switch from user mode to sRGB or AdobeRGB, I cannot achieve 6500K and monitor cant even display D65. Temperature is changing from 5800K to 6300K all over place anytime. Even luminance jumping from 150nits to 180cdm2. I never had this problem with my "old" LG ips monitor where sRGB clamp work. My target was 160cdm2 D65. Even after one sucesfull calibration and even validation check it just changed in few hundred kelvins in just few moments!

 

[fauc]

It is profile when modifying mode to sRGB or AdobeRGB so you cannot calibration under both.
Please calibration it when modifying mode to user.

 

[bleakclou15b602e7]

It is profile when modifying mode to sRGB or AdobeRGB so you cannot calibration under both.
Please calibration it when modifying mode to user.

I found issue. I think there is some conflict between monitors gsync and adaptive sync or something. I had 2 gsync monitors before without problem. But I found out after calibration everything is ok but soon I change monitor, duplicate or extend screen, colors are wrong. So I turned off one, calibrate it same with second one and now color are ok finally. Windows has problem with it also and just changing icc profile no matter how many times I set icc profile to correct monitor. This is first time I have different monitor than Gsync and maybe there was issue.. But now I have issue with Adaptive Sync which is interesting one. Lightroom and Premiere pro is flickering on MSI monitor when Adaptive Sync is on and only MSI is turned on. When I turn on second monitor, everything is ok. It's complete jungle with these monitors.