K7 Pro (MS-6195) VRM models

jakub-p2

New member
PRIVATE FIRST CLASS
Joined
Feb 29, 2020
Messages
18
Hi,
I have K7 Pro board with typical MOSFET failure - random freezes, 4 red LEDs after that, Vcore set to 1.6V while board reads from 1.64 to 1.69, works longer the colder it gets, board recapped. Near the CPU slot are 5 ICs, 1 that I cannot read (probably 5v regulator Infineon LX8384), 4 in heatsinks, 2 - FDP6035AL, 2 - SUP75N03-04. As the motherboard has already been tampered with I wonder if that's original placement of these ICs. I would be delighted if someone has already done that and shared his experience :)
 
You must log in or register to reply.
Top