KT3-Ultra Aru

M

Mario

Guest
Hi, anybody knows why the main board Kt3 still boot in up. I already change the main board but the problem persist. I have Athlon 2000+ HD 80Maxtor133 Gf3ti200, memory 333 samsung. I change the procesor, vcard, memory to another main board and works great. The Bios has the final version update 5.40. I will apreciate if some one could help with this problem.

?(
 
Sort by date Sort by votes
I'm sorry but I'm a little dumb ( english is not my mother language) and I do not understand what you mean saying "the main board kt3 still boot in up"

Can you explain it a little bit more in details?

Ciao
 
Upvote 0 Downvote
Sorry if i cant explain better. My problem is that my coputer boot. when i working or do nothing in it. Sorry for my lack of words. I dont know very much english. thats all i can do.
 
Upvote 0 Downvote
Dear Mario:

Avoid PCI Slot 1 and 5

Pls go to Bios.

and try to set the following:

Bios (5.4) settings

Advanced BIOS Features:
S.M.A.R.T Disabled
Internal Cache WriteBack
System BIOS Cacheable Disable
C000,32k Shadow Disable
APIC Function Enabled
MPS Table Version 1.4

Advanced Chipset Features
DRAM Timing Control
Configure SDRAM Timing by SPD
Current Host Clock 133MHz
SDRAM Frequency HCLK+33
SDRAM CAS# Latency 2
Row Precharge Time 2T
RAS Pulse Width 5T
RAS to CAS Delay 2T
SDRAM Bank Interleave 4-Way (for 2 sticks)
SDRAM Burst Length 4 QW
SDRAM 1T Command Disable
Fast Command Normal

AGP Timing Control
AGP Mode Auto
AGP Comp. Driving Auto
AGP Fast Write Enabled
AGP Aperture Size 128MB
All the rest is disabled

PCI Delay Transaction Disabled

Power Management Features
IPCA Function Yes
ACPI Standby State S1/POS
Power Management/APM Enabled
CPU Critical Temperature 80?C

Plug an Play Aware O/S Yes
Clear NVRAM No
PCI Latency Timer 64
PCI IDE Busmaster Enabled
All the rest set to AUTO

Frequency/Voltage Control
Spread Spectrum Disabled
CPU FSB Clock 133 MHz

Using nvidia detonator driver and Via 4in1 2940 driver
Best of luck.
 
Upvote 0 Downvote
Dear Mario:

Avoid PCI Slot 1 and 5

Pls go to Bios.

and try to set the following:

Bios (5.4) settings

Advanced BIOS Features:
S.M.A.R.T Disabled
Internal Cache WriteBack
System BIOS Cacheable Disable
C000,32k Shadow Disable
APIC Function Enabled
MPS Table Version 1.4

Advanced Chipset Features
DRAM Timing Control
Configure SDRAM Timing by SPD
Current Host Clock 133MHz
SDRAM Frequency HCLK+33
SDRAM CAS# Latency 2
Row Precharge Time 2T
RAS Pulse Width 5T
RAS to CAS Delay 2T
SDRAM Bank Interleave 4-Way (for 2 sticks)
SDRAM Burst Length 4 QW
SDRAM 1T Command Disable
Fast Command Normal

AGP Timing Control
AGP Mode Auto
AGP Comp. Driving Auto
AGP Fast Write Enabled
AGP Aperture Size 128MB
All the rest is disabled

PCI Delay Transaction Disabled

Power Management Features
IPCA Function Yes
ACPI Standby State S1/POS
Power Management/APM Enabled
CPU Critical Temperature 80?C

Plug an Play Aware O/S Yes
Clear NVRAM No
PCI Latency Timer 64
PCI IDE Busmaster Enabled
All the rest set to AUTO

Frequency/Voltage Control
Spread Spectrum Disabled
CPU FSB Clock 133 MHz

Using nvidia detonator driver and Via 4in1 2940 driver
Best of luck.
 
Upvote 0 Downvote
I have the same configuration and the problem persist. I have a power supply 350 watts. Could this be the re-boot problem? i dont know any other logical explanation.

?(
 
Upvote 0 Downvote
hi

what brand is it ,what are the maximum amps for

the various woltages,should be on it

note max not peak,the lower figure each time needed
 
Upvote 0 Downvote
Back
Top