looking for this BIOS

[JAcKal_6686]

Hi all I have a K8N Neo4-F Rev 3 that i just installed a A64 4000+ San diego E6 core cpu on and I lost the option to set the Mem command rate in the BIOS, if I read correctly BIOS Ver. W7125NCG.1C0 will fix this.

I've searched the forum trying to find a working link to this BIOS with no luck, does anyone know where i can find it?

Thank you  :grin:

JAcKal

 

[Svet]

your board is using BIOS ver. 5.xx

 

[JAcKal_6686]

yes it reads at post as W7125NMS v5.3 072106

 

[Svet]

so you want to do crossflash?

 

[JAcKal_6686]

I would like to get this option back so i'd like to flash it yes not really sure what the term crossflash means though (lol I'm a little bit of a noob I guess)

 

[Svet]

I would like to get this option back so i'd like to flash it yes

there is big chance that experiment to end with dead board.. because the target BIOS is not for your board...

 

[JAcKal_6686]

may have miss read the posts on this subject but i belive it has been used by people with my board to correct this problem.

 

[Svet]

may have miss read the posts on this subject but i belive it has been used by people with my board to correct this problem.

well here we go.. but as i said there is big chance to end with dead board, or at least some of features to do not working property.
if you known what you are doing, here is the file.
use at OWN risk..

 

[JAcKal_6686]

Thank you Bosskiller for the download and I would never blame anyone else lol

 

[Svet]

Thank you Bosskiller for the download and I would never blame anyone else lol

you should be noted about the risks.

 

[JAcKal_6686]

Hey Bosskiller talked to MSI support and they sent me a BIOS for my board that fixed the problem
Thanks for your help  :grin:

JAcKal

 

[Svet]

Hey Bosskiller talked to MSI support and they sent me a BIOS for my board that fixed the problem
Thanks for your help  :grin:

JAcKal

nice