MAG Infinite S3 14NUE7 Issue with M-Flash: Black screen after reboo MAG H610

[yatsenko.m158502df]

When I enter the BIOS and select the M-Flash option to update the firmware, the system prompts for a reboot as expected. However, after restarting, the screen stays black, and the BIOS flashing interface does not load.
Details:

• Motherboard: H610
• Current BIOS version: B.30
• USB Drive: I have prepared a FAT32 formatted USB flash drive with the BIOS file placed in the root directory.
• Steps taken: I’ve tried different USB ports (including USB 2.0) and cleared CMOS, but the M-Flash screen still won't appear after the reboot.

MAG Infinite S3 14NUE7
Intel(R) Core(TM) i7-14700F

 

[FlyingMog]

Are you using DP or HDMI on the discrete graphics card? Please try using an HDMI cable and make sure it is fully inserted into both the desktop PC and the monitor. If you have another monitor, you can also test using a single monitor only.