MAG161V settings resetting when powering off the monitor

matj654

New member
PRIVATE E-2
Joined
Apr 30, 2020
Messages
1
Hello, I just purchased a MAG161V portable monitor. I am having poblems with the OSD settings (brightness, contrast, volume...), every time I power off the monitor they reset and I have to set them again every time I power it on. It just does not makes sense, has anyome have the same issue? I think the monitor may be defective but I would like to be sure it it before requesting a new one. I opened a ticket with tech support, I am waiting for their answer. Thanks!!
 

zerijelly

Member
FIRST LIEUTENANT
Joined
Jul 5, 2016
Messages
822
After set any settings of the monitor, please press "P button" or "Middle button" for one time. The settings shall be saved if one additional click on one of the two buttons.
 

Attachments

peterbakker

New member
PRIVATE E-2
Joined
Jun 6, 2020
Messages
1
zerijelly date=1588559210 said:
After set any settings of the monitor, please press "P button" or "Middle button" for one time. The settings shall be saved if one additional click on one of the two buttons.
zerijelly date=1588559210 said:
I have the same problem, but this did not solve it.
 
Joined
Oct 1, 2021
Messages
2
Hello, I just purchased a MAG161V portable monitor. I am having poblems with the OSD settings (brightness, contrast, volume...), every time I power off the monitor they reset and I have to set them again every time I power it on. It just does not makes sense, has anyome have the same issue? I think the monitor may be defective but I would like to be sure it it before requesting a new one. I opened a ticket with tech support, I am waiting for their answer. Thanks!!
Do you have the solution?I have the same problem
 

fauc

Active member
SECOND LIEUTENANT
Joined
Nov 21, 2019
Messages
722
Please connect two cables at the same time between MAG161V and system/PC.
Example: HDMI cable and Type-C cable / USB cable and Type-C cable.
 
Top