Monitor arm adaptors

[davidgarland1]

Hi all, just wondering if anyone could point me in the right direction for the VESA adaptors I would need to attach a MSI Optix G27C4 and a MSI AG321CQR to a set of dual monitor arms?
Thanks.

 

[badboy2k]

MSI Optix G27C4 is a 100mm by 100mm Vesa Mount and the MSI AG321CQR is a 75mm by 75mm Vesa Mount!

usually the Monitor itself comes with a set of Standoffs to mount the screen to the mount.

 

[Nichrome]

Usually, but not always. My first MSI monitor didn't come with standoffs but the second did.
On the other hand, the monitor bracket I bought for wall mounting did come with the standoffs

 

[davidgarland1]

Thanks for the replies. Unfortunately no standoffs came with either monitor so I’ll need to purchase some. Would anyone happen to know if I will need to buy MSI standoffs or will a generic version work?

 

[darkhawk]

I just used half a dozen washers that were sized properly for the screws I was using.....worked well enough once tightened down.
Cheap way to do it, but not necessarily 'easy' by any means. But it worked!

 

[Nichrome]

That's exactly what I did the first time
These tend to be "universal" standoffs, though thread size may be different on both monitor and the arm.