MPG B550 Gaming Plus, SoC voltage low?

S

seithon

New member
Joined
Sep 14, 2017
Messages
2
Hey folks.

I'll keep this simple, in order to get better stability I went into the bios and set the SoC voltage to 1.15v
I've been using the system and today fired up HWINFO64 after experiencing some weird instability. I noticed it's reading the SoC voltage as 0.969v

Any ideas on why there's a missmatch between the bios setting and what's being read by the sensors?
 
citay

citay

Pro
SERGEANT
Joined
Oct 12, 2016
Messages
12,664
Did you set it as Override voltage, and was it actually applied in the BIOS? Can you make a screenshot of the relevant BIOS page (press F12 to make a screenshot to a FAT32 drive, then convert to PNG for size and upload here)?
 
S

seithon

New member
Joined
Sep 14, 2017
Messages
2
Heya,

Frustratingly I did just find a section last night in the override area about that and set the SOC voltage to 1.10v and it is now reporting it as 1.10v

I'll take a pic of it later, but so far so good. I'm running my memory at its "default" Jedec speed at the lowest setting and we'll see how it goes.
 
Top