MS-7100 Diamond/Platnium SLI

A

aicjofs

New member
MAJOR
Joined
Apr 13, 2005
Messages
811
After getting alot of emails about putting the BIOS mods here so people didn't have to search through the forums,(I had no idea so many people got use out of them) I have finally found the time.  Links are at the top.  I included md5 for those who use it.  Read the notes and change logs. I originally posted 5.xx mod's also but then wasn't sure if I was allowed to do that.  I have tested all of these BIOS as flashable, but things can go wrong with any flash so use at your own risk.


PLATINUM
3.AMOD
http://home.comcast.net/~msibios/7100MOD3A0.zip
md5 : 07b1d98f2e87829efb0d2fd04956c830
3.9MOD
http://home.comcast.net/~msibios/7100MOD390.zip
md5 : 7004bb0299d8a6e6b28cb04a83fd50b7
3.8MOD
http://home.comcast.net/~msibios/7100MOD380.zip
md5 : 77917e9dec8709cee266668eb35dd783
3.7MOD
http://home.comcast.net/~msibios/7100MOD370.zip
md5 : 1114c30be8c3573611f9cac0b2aaec6d

DIAMOND
1.8MOD
http://home.comcast.net/~msibios/7100MOD180.zip
md5 : 57bad5996bb78ac82e2fb032e835fbd9

Notes

+ The Diamond and Platnium BIOS's are interchangeable
+ I have modded a few of the Diamond overclocking BIOS's(the 5.xx series).  I don't post them here since they are not publically available.  PM me for questions about this ;)
+ If you would like a MS-7100 BIOS that is not here, or have an issue with these BIOS, post here and let me know.
+ The 3.9 MSI stock BIOS had issues with users running SATA RAID and had a PATA hard drive also. WinXP would not boot.  I haven't checked if this was fixed in 3.A.  If you have this issue try this work around https://forum-en.msi.com/index.php?topic=94800.0 reply #20


Change Logs

Phoenix-Award 6.0PG 7100MOD3A0 Platinum

Based on the Final 3.A release by MSI.
+ Support NVIDIA 7900X2 PCI-E VGA card.
+ Add safety recover function to revert BIOS into default setting when system unable to boot due to overclocking.
To enable the function please press the reset button or power button 3 times.

CHANGE LOG
----------
(REV.1 06/21/06)
+Added 150Mhz and 183Mhz Memory Dividers.
+Restored CPU VID options from .8v - .975v
+Removed 216Mhz Memory Divider.
+Show hidden BIOS features
+Disabled Full Screen Logo as Default
+For MS-7100 boards with optional onboard SiI3132 Controller: Updated BIOS version from 7.2.18 to 7.2.30

IMPORANT NOTES
--------------
1) If you are using the SiI3132 controller ensure you follow the directions below BEFORE flashing your BIOS.
++Verify the SATARAID5 SiI3132 driver version to be 1.3.0.9
++or the BASE SiI3132 driver version to be 1.0.7.1 or later.
++If the driver version precedes those noted, download the latest driver from www.siliconimage.com.


Phoenix-Award 6.0PG 7100MOD390 Platinum

Based on the Final 3.9 release by MSI.
+ Support "Cool'n'Quiet" function under Windows 2000.
+ Update CPU ID.

CHANGE LOG
----------
(REV.1 03/08/06)
+Added 150Mhz and 183Mhz Memory Dividers.
+Removed 216Mhz Memory Divider.
+Show hidden BIOS features
+Disabled Full Screen Logo as Default
+For MS-7100 boards with optional onboard SiI3132 Controller: Updated BIOS version from 7.2.18 to 7.2.30

IMPORANT NOTES
--------------
If you are using the SiI3132 controller ensure you follow the directions below BEFORE flashing your BIOS.
++Verify the SATARAID5 SiI3132 driver version to be 1.3.0.9
++or the BASE SiI3132 driver version to be 1.0.7.1 or later.
++If the driver version precedes those noted, download the latest driver from www.siliconimage.com.


Phoenix-Award 6.0PG 7100MOD380 Platinum

Based on the Final 3.8 release by MSI.
+ Update CPU micro code.
+ Improve compatibility problem with some AMD K8 Opteron cpu.

CHANGE LOG
----------
(REV.1 12/07/05)
+Added 150Mhz and 183Mhz Memory Dividers.
+Removed 216Mhz Memory Divider.
+Show hidden BIOS features
+Disabled Full Screen Logo as Default


Phoenix-Award 6.0PG 7100MOD.370 Platinum

Based on the offical 3.7 release by MSI.
+Improve compatilbility problem with some USB 2.0 devices

CHANGE LOG
----------
(REV.1 10/01/05)
+Added 150Mhz and 183Mhz Memory Dividers.
+Removed 216Mhz Memory Divider.
+Show hidden BIOS features


Phoenix-Award 6.0PG 7100MOD180 Diamond

Based on the Final 1.8 release by MSI.
+ Update CPU ID.
+ Support Opteron CPU.

CHANGE LOG
----------
(REV.1 1/15/05)
+Added 150Mhz and 183Mhz Memory Dividers.
+Removed 216Mhz Memory Divider.
+Show hidden BIOS features
+Disabled Full Screen Logo as Default

 
Sort by date Sort by votes
thanks for spend your time to post it and brief it aicjofs. its really nice idea to put all modded BIOSes into one place with good description on it.
really nice idea from moderators to open this section, its safe much time for searching arround entire forum.
 
Upvote 0 Downvote
Thanks.

I think it was a good idea for the moderators to make this child board also.  Good to group everything together, and keep modded BIOS a bit segregated from the rest of the forum.
 
Upvote 0 Downvote
9.3 is the latest I have heard of but it's not on the MSI site and neither is 9.2.  They might have been buggy or it's a snafu at MSI and they never posted them.

It appears that 9.1 is based off of the 3.6/1.6 for the 7100 boards or at least the original.bin is the same so it's quite old.  If I ever have motivation one night and someone gives me 9.3 I would cross flash to my board to see if flashing a 7100-030 to a 7100 is possible.  It might then be possible to use the 7100 BIOS' in a 7100-030, although it may not work quite like that.

Only person I know that has 9.3 for sure is OPaul from this forum, and MSI tech support.
 
Upvote 0 Downvote
I would like to know if Modded 3.A platinum bios supports E6 core Sandiego CPU's . I tired this modded bios with my A-DATA DDR600 and e6 cpu, but couldnt see the command rate option. Also it isnt available for official 3.A bios. You can check the full post related with this problem. I hope there is something that you can fix. :)
https://forum-en.msi.com/index.php?topic=104936.0

cheers.

 
Upvote 0 Downvote
KAPTAN said:
I would like to know if Modded 3.A platinum bios supports E6 core Sandiego CPU's . I tired this modded bios with my A-DATA DDR600 and e6 cpu, but couldnt see the command rate option. Also it isnt available for official 3.A bios. You can check the full post related with this problem. I hope there is something that you can fix. :)
https://forum-en.msi.com/index.php?topic=104936.0

cheers.
Click to expand...
you can take a look here: https://forum-en.msi.com/index.php?topic=104694.msg773968#msg773968
7100V3A has been successfully used on 7185 board to restore OC potencial but on E6 CPU command rate option disappear,
there is a forced 7100V3A 1T via mod.
 
Upvote 0 Downvote
Just thought I would bump this thread and see If anyone modded their MS-7100 K8N neo4 Platinum SLI bios for Vista and incorporated the latest sil3132 raid and Nvidia Raid Roms into one yet...
 
Upvote 0 Downvote
Yes I did before I tore down the rig.  Had no issues with limited testing with Vista.  Same 7.3.13 it looks like you are using for SiImage.  I was using a 5.0B mod I made for Indigian with all the latest firmware till I took it apart.  I just don't post 5.xx BIOS mods here, I doubt I'd get it trouble but just to be on the safe side.


 
Upvote 0 Downvote
Back
Top