MS-7670 (Big Bang Marshal) - RAM WILL NOT run at default speed.

doubleohseven

New member
SECOND LIEUTENANT
Joined
May 20, 2011
Messages
138
Hi everybody, I am having a strange problem I hope you all can help me with.  I am getting a double boot issue, when I start up the computer, it gets stuck at code 69 (late north bridge initialization), then reboots.  This is where it gets strange - upon reboot, the computer passes the point where the BIOS loads, then boots to a black screen - it will not load the OS (or boot from a CD or a USB drive for that matter) no matter what I try.

The problem seems to be correlated with RAM. The first RAM I had on this system was http://www.newegg.com/Product/Product.aspx?Item=N82E16820220535, I ran with X.M.P. enabled (at 1866, since this RAM was 2000), and had the issue described above.  Went ahead and tried it at 2133, disabled X.M.P., loosened the timings, and bumped the voltage up to 1.7v - still a no go. So I re-enabled X.M.P., lowed the voltage back to 1.65v, and tried 1600. It worked, and that is how I was using the computer for almost 2 months with no problems.  This weekend, RAM went on sale at newegg, so I sprung for some 1.5v RAM, thinking that might be the issue. I bought http://www.newegg.com/Product/Product.aspx?Item=N82E16820233142, which says it is optimized for Sandy Bridge systems. Well I tried all the steps I did with the other RAM, and its still a no go.  I am running currently at 1.5v, with X.M.P. enabled, at 1600 (default it 1866).

P.s. This was happening with BIOS 1.0, so I upgraded to 1.1 with no problems, but the problem is still there.

I hope you guys can help me troubleshoot this problem, because I am at a loss here. Thanks in advance for all your help.

-Frank

 
Aaron said:
Exactly what settings are you inputting for DDR-1866?

Juice DRAM voltage to 1.67V.  Change timings to 9-9-9-27 CR2.  Set tRFC to 88-92.

Thanks for your reply Aaron.  I will try to up the RAM voltage when I OC to 1866.  The timings are manually set to 1T-9-10-9-27 @1600.  The rest is set to "auto" according to X.M.P.

Also, do you think the CPU IO voltage should go up a little bit, to fix the OS not loading issue when double booting?
 
Well guys, I hope I figured it out once and for all. All I did was increase the CPU IO voltage from 1.35v ("auto" setting), to 1.37v (the BIOS recommends 1.4v as the max), increased the RAM voltage to 1.69v, and changed the timings to 2T-9-10-9-27 @1866. It is booting up into Windows, no double boot, at 1866.

As for 2133, it is still giving me A LOT of trouble, but I think that is due to the mismatched RAM at this point.  I might try removing the Patriot RAM tomorrow and see if I can get the Corsair Vengeance up to 2133.

I wanted to thank everyone who helped me out here, I really appreciate it!  Ill keep you guys informed if it stops working, or if I get the Vengeance up to 2133.

Thanks again,
-Frank
 
Well, it appears I spoke too soon guys. :/ My system boots fine at 1866 from a restart, but from a cold boot, it does what it always does... double boots, then a blinking cursor. At that time, I can press the restart button on my comp, and it will boot just fine and go into the OS, but it is REALLY annoying. I went back to 1600, and everything is booting fine.

I don't understand why when it double boots, it wont load into the OS or boot from any devices?!!!!! Looks like I am just going to have to stay at 1600 and forget all about this problem...

P.s. I tried taking out the mismatched RAM, just running the Vengeance, did not help... 
 
May need a bit more voltage to the CPU and the CPU IO to carry 1866 ..... if they are native 1866, may not be able to hit 2133 without loosening timing maybe 10-10-10-30 or even looser, and even more voltage...I'd try to get 1866 stable and then work from there and save your current 1600 stable BIOS settings for fallback
 
In the OP's Reply #6, he has determined the chips are 1333. Being already overclocked & overvolted using his current settings, more overvolting DRAM V. beyond 1.65v's, & OC'ing of already OC'd RAM, borders on (edited).

doubleohseven, if you just can't live without having RAM speed (that serves close to no practical performance benefit) at 2133, suggest the purchase of memory modules of that 'rating'. OC'ing RAM that is already OC'd, is not the way to go about it.
 
Lol, I never said I could not live without the RAM being above 1600, I just wanted to try to figure this problem out, since other people seem to be getting their RAM to 1866 and 2133 without much problem.  Also, people do not seem to be having this weird double boot issue described, but since no one here knows about the double boot problem, I will just have to live with 1600, and I am fine with that.
 
Mike said:
doubleohseven, you would gain very little going above 1600...heck, you aren't gaining that much being above 1333.

Right, I know that, and thats why I dont really mind running at 1600.  There was just several issues I wanted addressed (the double booting with no loading into the OS or booting from any devices) that are not normal (if you read the entire thread). 
 
the double booting with no loading into the OS or booting from any devices) that are not normal
These symptoms are taking place in an 'out of specification' state. All three 6 series boards tested here will do it with certain combinations of settings. Not all that unusual with Intel chipsets. Reasonably sure it has to do with frequency, but haven't the equipment to prove that theory.

I just wanted to try to figure this problem out, since other people seem to be getting their RAM to 1866 and 2133 without much problem.  Also, people do not seem to be having this weird double boot issue described
In summary, the main problem as far as the RAM is concerned that you have, it is already OC'd & it doesn't like to be OC'd any further than it's 'rated' speed. The double boot is an anomoly common with Intel chipsets. Possibly frequency related. That it goes away with other settings is proof it is not an incurable constant issue. If 2133 RAM speed is desired, RAM of that 'rated' speed should be purchased. Not going to drop a brand name here, but the 2400's I have will do 2133 standing on their heads at only 1.62v's!

May need a bit more voltage to the CPU and the CPU IO to carry 1866 ..... if they are native 1866, may not be able to hit 2133 without loosening timing maybe 10-10-10-30 or even looser, and even more voltage...
To the best of my knowledge, 1866 chips don't exist. If you do any testing with a memory performance utility, MaxxMEM2 is a good one, even reaching 2133 with super loose timings & a CR of 2, DRAM V. way higher than they should be, the results are pathetic at best as to any significant performance increase. This thread has just about ran it's course. Current settings that are working stable should serve you well. :-))
 
Back
Top