Msi 27" Pro MP273U

[robinbredi132502bb]

I connected my new monitor to my computer via the graphics card. The flash screen on the monitor comes on and then nothing happens. After a few minutes another message comes up saying, HDMI 1 No Signal. I then checked the connection with my graphic and it was Ok. I tried a few time, but the same error message comes up. I removed the monitor, and connected my dell monitor, and it was Ok. I don't know if this has anything to do with it, but I have a MIS Pro B850-P WIFI motherboard. Thanks

 

[FlyingMog]

Please enter the monitor OSD menu, go to Input Source : Auto Scan, and set it to Off. Then manually select the input you will use (DP / HDMI1 or HDMI2), and test again.

 

[robinbredi132502bb]

Hi, How do you get the monitor OSD menu. Thanks

 

[FlyingMog]

Hi, How do you get the monitor OSD menu. Thanks

Please see the monitor manual in English on page 7 (https://download-2.msi.com/archive/mnu_exe/monitor/PRO_MP273Uv1.1_English.pdf) or refer to the image below and press the button in the red section to open the OSD menu.

 

[robinbredi132502bb]

Thanks FlyingMog for your help.