No it is your fan speedThe green dot on the x-axis is displaying 100degrees C, which I know it's not so I believe it's reading Fahrenheit and that's why it's so high
The green dot is supposed to be fan speed in relation to temperature. That's why it's a "Smart fan" as it is supposed to adjust fan speed according to the read in temperature.No it is your fan speed
CPU fan 1 is at 75%
Sys Fan 6 is at 82%
All that page dose is display your FAN speed and the fan curve settings no temps at all
fan % vs temperature is for when you modify fan profile. Once it's done, either there's no green dot or green dot should always stay at the most right.What you mean "IF x-axis is temperature"? The x-axis on the graph literally says it is °C.
Oh I did see it and you PC runs backwards in time so it can log all over again in same place as before never seen that before. Did you get that Computer of Doctor WHOfan % vs temperature is for when you modify fan profile. Once it's done, either there's no green dot or green dot should always stay at the most right.
If MSI is going to modify the graph, they should make the x-axis display temperature when you change the fan profile and when you wanna monitor it, x-axis changes to time.
If the x-axis is really temperature when it's logging, then it shouldn't leave any green line after the green dot (you might wanna see the ugly command center picture that i posted earlier again which makes absolutely no sense in term of monitoring). But it will become a useless diagram because it doesn't "monitor" anything