MSI MAG 341CQP Issues with enabling

zhezher92

New member
PRIVATE E-2
Joined
Dec 1, 2017
Messages
6
MSI MAG 341CQP with latest firmware FW.031 + msi mpg x870e edge ti wifi with bios 7E59v1A33 + MSI GeForce RTX 5080 Gaming Trio OC
The monitor is connected via DisplayPort. Windows 11 is installed with all updates. When turning on the PC, there is often a black screen, and the monitor's power LED turns red. I have to turn the monitor off and on again for the image to appear. If I connect a second monitor via HDMI, the boot menu and BIOS are displayed on the other monitor. I also tried connecting this monitor via HDMI and the other one via DP — the problem is the same: the image appears on the other monitor. I’m using the cables that came with the monitor.
 
As checking, the power LED should be white or orange as manual on page 7.
Lit in white after the monitor is turned on.
If no signal input, the LED will turn into orange. Lit in orange when the monitor is in Stand-by mode.

1.Please refer manual on page 14 and modify "Auto Scan" to OFF in input source page under OSD menu..
2.Please refer manual on page 16 and modify "Power Button" to Standby in settings page under OSD menu.
 
As checking, the power LED should be white or orange as manual on page 7.
Lit in white after the monitor is turned on.
If no signal input, the LED will turn into orange. Lit in orange when the monitor is in Stand-by mode.

1.Please refer manual on page 14 and modify "Auto Scan" to OFF in input source page under OSD menu..
2.Please refer manual on page 16 and modify "Power Button" to Standby in settings page under OSD menu.
This helped! Everything is finally working as it should. Thank you very much!
 
Back
Top