MSI MAG PANO 100R PZ fan hub problem

P

polina.redb153a02d5

New member
Joined
Jun 2, 2026
Messages
2
I'm not the best at pc building and I have just built my pc and connected my fans to the fan hub, but it seems like I can only control the fans color via the case? Whenever I switch the control to my motherboard (by pressing the led button for ~5 seconds) they just turn off and don't show up in any software. What am I missing? My motherboard is gigabyte x870e aorus elite wifi7, maybe I haven't connected something? Or perhaps I need an msi motherboard for this, which I highly doubt.
 
Sort by date Sort by votes
polina.redb153a02d5 said:
I'm not the best at pc building and I have just built my pc and connected my fans to the fan hub, but it seems like I can only control the fans color via the case? Whenever I switch the control to my motherboard (by pressing the led button for ~5 seconds) they just turn off and don't show up in any software. What am I missing? My motherboard is gigabyte x870e aorus elite wifi7, maybe I haven't connected something? Or perhaps I need an msi motherboard for this, which I highly doubt.
Click to expand...
Is the hub connected to your motherboard? The ARGB for the hub will be controlled by your motherboard settings I believe.
What ARGB software are you using to control the ARGB?
 
Upvote 0 Downvote
polina.redb153a02d5 said:
I'm not quite sure if it is connected, since a company built the pc for me. Which port should it be connected to? I'm also using signarlrgb
Click to expand...
There you will need a 3 pin ARGB header on your motherboard, so you'll have to check your motherboards website or manual if you have it, to see where it's located on your motherboard. There should be a cable running from the ARGB hub header to your motherboard. That's what you'll have to check first.
 
Last edited:
Upvote 0 Downvote
Back
Top