MSI MAG VAMPIRIC 010 How work RGB?

Status
Not open for further replies.

bajatak21

New member
PRIVATE E-2
Joined
Aug 31, 2019
Messages
1
Hello,

Im considering about buying msi mag vampiric 010 case. My question is : How RGB works? if I wanna use it in MSI Mystic Light Do I have to connect it to motherboard ? If yes with RGB LED 12V or 5V ?
 
Yes you have to connect it with the JRGB from your Motherboard.

The JRGB connectors allow you to connect the 5050 RGB LED strips 12V.


Important: connect + from the cable with + from the JRGB ;-)
 
No, the infos provided by sascha.nagl are all not correct. 

The LED strip in the front can only be connected to power and not controlled with a mainboard but only with a button on the case.

The fan uses addressable +5v LEDs and can only be connected to a JRAINBOW 3-pin header for LED control via the mainboard. Else you'd need an external controller for addressable LEDs (+5v).

It is not possible to connect it to a 12v (4-pin) JRGB header.
 
The LED strip in the front is ARGB 5v.....4pin......hmm?
Please start a new topic
>>Please read and comply with the Forum Rules.<<
>>Posting Guide<<

111aaa.jpg
 
Status
Not open for further replies.
Back
Top