MSI MEG CORELIQUID S360 PROBLEM

C

cakmak.se15bc02eb

New member
Joined
Mar 4, 2024
Messages
17
Hi, couple of days ago i finished my build and everything was working allright. But today i've noticed something weird.

My system:
CPU: i9 -13900k
MOBO: MSI MPG Z790 Carbon Wifi
AIO: MSI MEG Coreliquid s360
Case: MSI MEG Prospect 700r

i've built this system so i can render images. but my aio radiator fans are stuck between 740-760 rpm and the temperature shown on the aio is stuck at 37 degrees celsius

even when my MOBO shows 95-99 degrees (led debug), aio screen still shows 37-40 degrees and my case fans and my aio radiator fans are pretty quiet.

i've tried to change the sync mode to MOBO from the case screen but then still my radiator fans are pretty quiet even though my case fans are spinning much more faster. (but their rpm are stuck even with no load)

probably an error related to msi center. i used sync mode to msi center and adjusted the fan curves. but still aio radiator fans are stuck at 740-760 rpm even though my cpu is burning.

what should i do? thanks in advance...
 
Sort by date Sort by votes
Belial, please, don't treat me as a fool. I did that experiments before you birth. I meant, I see that quite difficult, because others features are working. What can be magnetized, that only affects certain functions? maybe the sensor itself? well, we would have to see how the frecuency sensor works, to understand if it could be magnetized. The same goes for temperature sensor, but for this, your magnet theory fits easier. But, my "liquid temperature" sensor, never stucked at zero.
 
Last edited:
Upvote 0 Downvote
Aaron_z34 said:
Belial, please, don't treat me as a fool. I did that experiments before you birth. I meant, I see that quite difficult, because others features are working. What can be magnetized, that only affects certain functions? maybe the sensor itself? well, we would have to see how the frecuency sensor works, to understand if it could be magnetized. The same goes for temperature sensor, but for this, your magnet theory fits easier. But, my "liquid temperature" sensor, never stucked at zero.
Click to expand...
Unless you're in your 60's I doute that. As I said, "the parts closest." the sensors most likely are not all sitting next to each other. The one for the liquid would have to be a fair distance from the pump head so it's not picking up the heat from the CPU surrounding components and RAM. as for frequency, that information is coming straight from the motherboard, via the USB header.
 
Upvote 0 Downvote
cakmak.se15bc02eb said:
Hi, couple of days ago i finished my build and everything was working allright. But today i've noticed something weird.

My system:
CPU: i9 -13900k
MOBO: MSI MPG Z790 Carbon Wifi
AIO: MSI MEG Coreliquid s360
Case: MSI MEG Prospect 700r

i've built this system so i can render images. but my aio radiator fans are stuck between 740-760 rpm and the temperature shown on the aio is stuck at 37 degrees celsius

even when my MOBO shows 95-99 degrees (led debug), aio screen still shows 37-40 degrees and my case fans and my aio radiator fans are pretty quiet.

i've tried to change the sync mode to MOBO from the case screen but then still my radiator fans are pretty quiet even though my case fans are spinning much more faster. (but their rpm are stuck even with no load)

probably an error related to msi center. i used sync mode to msi center and adjusted the fan curves. but still aio radiator fans are stuck at 740-760 rpm even though my cpu is burning.

what should i do? thanks in advance...
Click to expand...
I have been having this problem with my MPG CoreLiquid D360 for months. I have tried all solutions everyone in my thread posted, yet the issue continues to persist. I'm bringing it down to MSI Center as a whole. The program needs a complete revamp/overhaul. I don't want to, but until they do a whole new MSI Center version that fixes every single issue, I'm going to be looking at Corsair for my AiO. No reason this should be happening.
 
Upvote 0 Downvote
na1lst0r15f202f1 said:
I'm going to be looking at Corsair for my AiO. No reason this should be happening.
Click to expand...
Do yourself a favour and avoid any AIO that needs Software to make it work. I won't use any like that I prefer the stock standard plug-in to the motherboard Fan and Pump Headers
Having the Software control the Pump and Fans is a bad Idea.
It should only control the RGB
 
Upvote 0 Downvote
Easily the worst software I have ever used. I have had this AIO for just over a year now and have gave up essentially, just chalk it up to a disaster and bad product. 0 degree reading constantly, sometimes it will work randomly, then on the occasion that issue is fixed, I then need to put up with the screen constantly "restarting" every 15-20 minutes making a connect/disconnect sound, to the point I've now turned system sounds off because its driving me nuts. a quick google and there's just pages and pages of issues with this product but nothing done by MSI to fix or even address it.
 
Upvote 0 Downvote
I never had any issue with my MSI MEG CoreLiquid S280. It works perfect after minor tuning since the beginning (early 2023).
For some reason, after new Coreliquid feature update (3.0.0.66) and Restart, my "Fan Settings" is always load "Balance" profile now. WHY?
If i switch manually to "Customize" profile and restart msi center it doesn't restore my custom settings and load "Balance" profile again. WHY?
Before update my "Customize" profile was been loaded as default with no problem.
Probably i should reverse to previous version of Liquid Cooler Management feature if it possible.
Any advice?

Thank you,
 
Upvote 0 Downvote
dihzo_8160202f4 said:
Easily the worst software I have ever used. I have had this AIO for just over a year now and have gave up essentially, just chalk it up to a disaster and bad product. 0 degree reading constantly, sometimes it will work randomly, then on the occasion that issue is fixed, I then need to put up with the screen constantly "restarting" every 15-20 minutes making a connect/disconnect sound, to the point I've now turned system sounds off because its driving me nuts. a quick google and there's just pages and pages of issues with this product but nothing done by MSI to fix or even address it.
Click to expand...
Internal USB connectors on MOBO never make a sound. Do you use an USB Hub?
Did you try to use another internal USB connector? Don't forget it should be usb 2.0
 
Last edited:
Upvote 0 Downvote
msi4me said:
I never had any issue with my MSI MEG CoreLiquid S280. It works perfect after minor tuning since the beginning (early 2023).
For some reason, after new Coreliquid feature update (3.0.0.66) and Restart, my "Fan Settings" is always load "Balance" profile now. WHY?
If i switch manually to "Customize" profile and restart msi center it doesn't restore my custom settings and load "Balance" profile again. WHY?
Before update my "Customize" profile was been loaded as default with no problem.
Probably i should reverse to previous version of Liquid Cooler Management feature if it possible.
Any advice?

Thank you,
Click to expand...

The issue was duplicated and MSI people are working on solution.
The fix is expected with MSI Center 2.0.35.0 + Coreliquid 3.0.0.68
 
Upvote 0 Downvote
Svet said:
The issue was duplicated and MSI people are working on solution.
The fix is expected with MSI Center 2.0.35.0 + Coreliquid 3.0.0.68
Click to expand...
Thank you for your Reply Svet.
Probably after updating BIOS to the last available on msi.com version Coreliquid doesn't save my settings at all.
I have to set all settings and screen direction every time after restart now :sneaky:
Hopefully MSI will able to fix it in nearest time

Thank you:woohoo:
 
Upvote 0 Downvote
msi4me said:
Thank you for your Reply Svet.
Probably after updating BIOS to the last available on msi.com version Coreliquid doesn't save my settings at all.
I have to set all settings and screen direction every time after restart now :sneaky:
Hopefully MSI will able to fix it in nearest time

Thank you:woohoo:
Click to expand...
The update is out now, as is MSI Centre version 2.0.35.0. I've not updated MSI Centre version as mine is working fine as it is.
 
Upvote 0 Downvote
Hi all
FYI
The last MSI Center update, 2.0.35.0 version, just breaks coreliquid software completely.
It is an either/or situation: either there is not a QA team in MSI or you have the worst developers ever known.
All my PC has MSI hardware except RAM, but I am fed up. This is the last one.
 
Upvote 0 Downvote
Back
Top