MSI pro post beep

[knexkid]

I am used to a normal POST beep being one short beep, and all is well.  Everything on my MSI pro seems to work fine, everything boots, and no errors occur, but the POST beep is rather weird.  I will try my best to describe it: Short high, short low, short pause, short high, short low.  The last 2 beeps occur a lot quicker than the first two.  Is that normal?  I figured it should just be one short beep. Thanks


Windows XP SP 2
MSI Pro BIOS 7.0
Core i7 920 OCed to 3.66GHz
ATI 4870x2
Creative Fatal1ty x-fi
6 Gigs DDR3 RAM
1.5 TB HDD
Optical Drive
950 Watt PSU (amps? I have no idea....how do I find out?)

 

[Jack the Newbie]

How many USB Devices are connected to the system.  Unplug a few of them, and count the beeps again.

 

[knexkid]

Ahh, thank you.  I had 3 things plugged in, my USB mouse, keyboard, and WIFI dongle.  I unplugged all 3 and got just a single beep.  Thanks, case closed, I assume that means I have nothing to worry about.  Is there a way I can turn those beeps off?

 

[Jack the Newbie]

I assume that means I have nothing to worry about.

Exactly.

Is there a way I can turn those beeps off?

Unplug the speaker from the pin header.

 

[Frankenputer]

As Jack states, disconnect the case speaker or don't have any USB devices attached. Personally, I just ignore the beeps.

As far as the PSU specs, there should be a label on the side of the PSU that lists the specs.

 

[HU16E]

knexkid's PSU Specs; +3.3V@30A, +5V@30A, +12V1@20A, +12V2@20A, +12V3@25A, +12V4@25A