MSI Sekira 500P Vertical gpu mount

Jacoblewis80

New member
PRIVATE E-2
Joined
Oct 22, 2019
Messages
4
Hi guys hoping someone could help me out here i have a Sekira 500P case and it has a built in part down the bottom where you would mount a riser so you could mount your gpu vertical but im not sure which ones are compatible im looking at this one here ---> https://www.pccasegear.com/products/50397/cooler-master-universal-pcie-3-0-x16-riser-cable-v2-200mm and im not sure if its infact compatible can someone confirm or deny and if it is not compatible could someone give me some information on which ones would be ok to use i usually go to the msi qvl to find part compatibility but i cant seem to find anything on this case maybe im lost cheers everyone.
 

flobelix

Well-known member
Global Moderator
Joined
Jan 25, 2007
Messages
39,448
The riser cable is a regular PCI-E 3.0 x16 so should work fine. If 200mm cable is long enough or too long you will have to measure and check yourself.
 
You must log in or register to reply.
Top