New builder: P67A G43 won't POST (I think..)

[Valuum]

Hey all, this is my first post, and incidently I'm also building my first pc. I've run into a problem and I don't know what to do! My rig is as follows:

Mobo: MSI P67A G43
CPU: Intel Core i5 2500K
GPU: MSI N560GTX Ti
RAM: 2x4gb Corsair XMS3 (1333)
PSU: Seasonic x650

I have NOT yet installed an OS, as I havent picked one up yet.

When I turn on the computer, I get 3 SHORT beeps: the first 2 are the same pitch, the 3rd beep is higher. Right after, the "msi military class II" logo flashes on the screen. Immediately after that, I get the following message: "reboot and select proper boot device or insert boot media...etc,etc". I can enter the bios, however I have to frantically hit the DEL key after turning on the comp, and there is no screen or message that says to do so during the above process. As this is my first build, I'm not well versed on what exactly a POST screen is, or if my specific mobo even has one.

Are these beeps normal? Am I supposed to see a POST screen at some point? I am aware that MSI boards give beeps based on the number of USB devices connected, however I get the same beep code without any USB devices connected.

EDIT: Google has brought me to other threads on this same topic, and it has been suggested that memory could be an issue, or an overheating CPU. When I am in the bios there is a memory test app available, and it indicates that my RAM is fine. As well, the bios indicates that my CPU is running at 32-33C. So I don't think that either of these things is an issue, but Im new and could be completely wrong.

 

[DaLoona]

Wel  it seems to go past post, since you got the message "reboot and select proper boot device or insert boot media", this means its all okay and it wants to boot an OS.
To see if it surely works, download >>Ubuntu<<, its free to use and see if it will boot all the way in it.

What the beeps mean, no idea, to see what post means, read here:
http://www.pcguide.com/ref/mbsys/bios/bootPOST-c.html
To see the bootscreen from MSI, you'd have to go in bios and turn it on somewhere, read the manual on how to do that.

But as far as I can tell by the looks of your story, if you install an OS, it should be fine.

 

[Stu]

FAQ: https://forum-en.msi.com/faq/article/bios-beeps-and-codes

 

[Valuum]

Thanks for the replies!

@ DaLoona: I've done a little more work, and managed to get the thing to POST after I cleared the CMOS, but I still get the beeps. Found a youtube video of what I'm talking about: http://www.youtube.com/watch?v=tOS-2E4egX8

Is this just the normal jingle?

Also, I did install Ubuntu but Im not sure if its working properly. I turn on my comp and after the MSI logo flashes on screen, I get a black screen with tons of writing on it (regarding Ubuntu), followed by a purple screen, which is followed by a choppy, artifact-ridden screen, which is then followed by the ubuntu desktop. The first time going in to the OS, I got a message saying that I didnt have the hardware required for Unity (???).

@Stu: I've looked at that page numerous times, but I cant seem to figure out if what Im hearing is related to any of the codes shown? My beeps are multi tone, and I am still able to access bios and boot media. Im just so lost!

I should also note that (with my Optical and HDD disconnected) after clearing the CMOS, I get the POST sceen on first boot only. All subsequent boots get me to a screen with the following message:

EFI Shell version 2.00[4.640]
Current running mode 1.1.2
map: cannot find required map name.

Press ESC in _ seconds to skip startup.nsh, any other key to continue.
Shell>

 

[cronnin]

1.Pull out video card and RAMs and reinsert carefully, confirming it's not loose. Visually inspect CPU cooler during.
2.Check if you've connected all the power cables to MoBo and Video card. Reinsert them, to confirm tight connection.

3. don't clear CMOS so often
4. no need to manically hit Del button, just wait for the beep, and when you see the keyboard diodes flash, start pressing slowly ~ 2x pre second for example
5. are you sure about the beep code?  i haven't heard different pitch beeps before
6. go into BIOS, load defaults, and check all 66 items turn off green power and other exotic enhancements for now
    But seriously - all devices should be properly recognized - CPU,RAM, HDD and optics, check IDE/SATA/AHCI settings, temperatures, voltages, boot sequence, integrated peripherals, etc.
    Double check CPU clock, multiplier, FSB speed, memory speed and ratio.
 
7. get a live Linux or Windows CD to boot up the system directly from CD
8. start Aida64 HWMonitor from USB (or what you prefer) to again confirm temps/voltages and FSB, CPU and memory speed... and RAM size/configuration properly recognized
9. Start testing system stability with Prime95 (or else), and be around to watch the temperatures
10. test video card for artifacts. I used AtiTool for mine, not sure what is good for 560GTX?

If fail, start pulling out you components -
one RAM stick out -test again
video card out - test again with Intel's GPU.

 

[DaLoona]

I should also note that (with my Optical and HDD disconnected) after clearing the CMOS, I get the POST sceen on first boot only. All subsequent boots get me to a screen with the following message:

EFI Shell version 2.00[4.640]
Current running mode 1.1.2
map: cannot find required map name.

Press ESC in _ seconds to skip startup.nsh, any other key to continue.
Shell>

Judging by this message, there seems to something missing, try as cronnin suggested and if all fails, try flashing your bios with the latest one.
Use the the forumflasher to be safe, read here how to do it:
https://forum-en.msi.com/index.php?topic=113295.0

You can find bios file here:
http://eu.msi.com/product/mb/P67A-G43--B3-.html
Under downloads, use lates one, that incorporates all previous fixes.