New MSI P55-GD80 build incredibly unstable

weihbe

New member
PRIVATE E-2
Joined
Oct 20, 2009
Messages
4
Just got a new motherboard, CPU and ram, went with the MSI P55-GD80, Core i5 750 and Mushkin 1600 (7-7-7-20). Only problem is every build I have is incredibly unstable. At first when I was installing Windows it would continually freeze on the expanding files section. I read this may be do to a memory issue, so I used just one stick in DIM1. This worked to install but if I put in more than 1 stick I would re-experience freezes and crashes (also experienced them with one stick however). I ran MemTest for 5 passes each stick one at a time, then all 4 at once without any errors. I popped in my Vista 64 disk and was able to install Windows and drivers (with all 4 sticks utilized), though shortly thereafter I again began experiencing crashes (where PC completely reboots) and/or freezes. If audio is playing at the moment it freezes it continually replays the last note, only distorted. I think at this point a memory issue has been ruled out. But everything I try does not seem to produce a different result. I've tried switching out working components from other computers in to see if I have the same problems, and I do, with two different hard drives, cd drives, video cards, and sound card combinations. And furthermore I know from my last computer that all of my recycled components function normally as well.

Also- Currently my case is open and my room is cool, temps on load rarely get about 40c.

Rest of system:
Corsair HX620 PSU (dedicated lines drawn to all components)
1xRadeon 4800X2
Seagate 500GB SATA, WD 640GB SATA, Sony Blu-Ray SATA


 
Make sure that the command rate is manually set to 2T in BIOS Setup.

Test with one memory module only (for the now) and see if that runs stable.
 
Back
Top