No Display with a AMD 3900x

Joined
Oct 18, 2020
Messages
4
CPU- AMD 3900x
MOBO - B550 Gaming Edge Wifi
GPU - GeForce 1050ti
Ram - 32GB
Storage 1 x m.2 1 TB

When I hit the power button, All of the lights turn on, All of the fans spin. It goes through the EZ Debug lights then holds solid on Boot.

Nothing is showing up on the monitor. Yes, I've changed DP & HDMI's and checked them all with other systems and laptops and it all works. Plugged it into the GPU. BIOS has also been updated via USB.

New build just wont display anything, and i'm losing my mind! We are flashing the bios now - any help would be appreciated - thanks
 

laurence1211

Active member
PRIVATE E-2
Joined
Jun 28, 2020
Messages
417
CPU- AMD 3900x
MOBO - B550 Gaming Edge Wifi
GPU - GeForce 1050ti
Ram - 32GB
Storage 1 x m.2 1 TB

When I hit the power button, All of the lights turn on, All of the fans spin. It goes through the EZ Debug lights then holds solid on Boot.

Nothing is showing up on the monitor. Yes, I've changed DP & HDMI's and checked them all with other systems and laptops and it all works. Plugged it into the GPU. BIOS has also been updated via USB.

New build just wont display anything, and i'm losing my mind! We are flashing the bios now - any help would be appreciated - thanks
This a new build, was it working then just stopped? What m.2 drive are you using exactly and in what slot?
Edit: I would also avoid the beta bios for now.
 
Last edited:
Joined
Oct 18, 2020
Messages
4
We could not get any video from the first boot we did a flash bios - rebuilt. we are using a M2 wd BLUE - WDS100T2B0B - 1TB - in the first M2 Slot - we flashed the bios and rebuilt -
we have no EZ Debug lights on at all - but still no video - any help would be appreciated
 
Last edited:

laurence1211

Active member
PRIVATE E-2
Joined
Jun 28, 2020
Messages
417
We could not get any video from the first boot we did a flash bios - rebuilt. we are using a M2 wd BLUE - WDS100T2B0B - 1TB - in the first M2 Slot - we flashed the bios and rebuilt -
we have no EZ Debug lights on at all - but still no video - any help would be appreciated
Ok well the graphics card does need a firmware update, but using one hdmi port only gets round that for now. What ram are you using? Have you tried with only one stick? What else is in the system? Whats the power supply and have you checked all the cables?
 

flyingv2815b702e7

Active member
Joined
Aug 14, 2020
Messages
416
Does the monitor stay in stand by mode,
or does it wake but black,
or look closely, is there an old-style text cursor in the upper left?

I would try removing the drives.
POST can get stuck on reading the MBR or GPT data and occasionally have trouble with
a new uninitialized drive.
 
Top