No matter what I do. Computer will not boot to post

[ericnazim15c102ea]

Things I've tried
Reset ram stick
Power drain
Reset cmos
Flash MSI.ROM (stable and beta bios )
Reposition gpu
Reposition all cables
Unplug all drives then plug back in
Plugging HDMI to motherboard instead of GPU and pray still nothing.
Motherboard has no lights on boot just black screen

 

[plutomate]

What MSI product do you have? Is it a new build? List all components as well.

 

[ericnazim15c102ea]

What MSI product do you have? Is it a new build? List all components as well.

Mobo B450 tomahawk max 2
CPU Ryzen 7 5800
GPU AMD Radeon RX 6700 XT
Ram aegis g skill 32 gb ddr4
3 SSDs 2x 1 tb 1x 2 tb

 

[Nichrome]

Can you please be specific on what you use? I shared a link with you on your double thread..
Is this a new build or did it work before?
>>Posting Guide<<

Troubleshooting online can only be effective if you provide as much details as possible.

 

[plutomate]

Does any debug LED light up? CPU, DRAM, VGA, Boot?
If no LED at all, remove CPU and try again see if LED stays at CPU and examine if any bent pin on CPU.
If still nothing, check if your PSU works properly, you could perform paper clip test and see if PSU fan ramp up, try minimum settings, CPU, 1 stick of RAM, VGA and monitor connects to graphics card.

 

[ericnazim15c102ea]

Does any debug LED light up? CPU, DRAM, VGA, Boot?
If no LED at all, remove CPU and try again see if LED stays at CPU and examine if any bent pin on CPU.
If still nothing, check if your PSU works properly, you could perform paper clip test and see if PSU fan ramp up, try minimum settings, CPU, 1 stick of RAM, VGA and monitor connects to graphics card.

No LED at all I'm am about to remove the CPU today to see if that works since you mentioned no LED and see if that works.

 

[ericnazim15c102ea]

Does any debug LED light up? CPU, DRAM, VGA, Boot?
If no LED at all, remove CPU and try again see if LED stays at CPU and examine if any bent pin on CPU.
If still nothing, check if your PSU works properly, you could perform paper clip test and see if PSU fan ramp up, try minimum settings, CPU, 1 stick of RAM, VGA and monitor connects to graphics card.

So I put the CPU back in and still black screen PSU seems to be working properly . Still no light and flashed bios update . It was shut off during prompt before start of it windows installation