No response from computer and monitor on Msi 970a-g46 board after installing incompatible control center (dragon center)

K

Kaliszu20012fe02b6

New member
Joined
Feb 12, 2025
Messages
5
Hello everyone I have a pretty big problem with a pretty old Msi 970a-g46 set with fx 8320e and rx 260 But it doesn't matter what set it is, but what I did recently I thoughtlessly installed https://www.msi.com/Landing/dragon-center-download/nb in a computer that didn't support it And well.. The computer started to reset over and over and when I turned it off It turns on but hangs somewhere in the bios The monitor screen doesn't turn on and I can't hear any signal I tried to re-upload the bios Hello But I don't really know how to start It's probably something like windows on rufus Could someone help?? I WOULD ASK for the bios and what should I do with what program so that it starts with the system I



Bios uefi 2.8 Windows 11



And I apologize for the correctness of the spelling, but everything was typed by a translator
 
Sort by date Sort by votes
Well, first priority has to be to get a picture again. When you can see something, you can for example enter the recovery environment of your Windows, or boot from a Win11 installation USB drive, enter the troubleshooting options, and restore the previous system restore point (from before having installed Dragon Center). Something like that. When you can't see a picture, you can't do anything.

Can you list all your hardware in detail, including the PSU?
 
Upvote 0 Downvote
citay said:
The thing is that this configuration has been working for many years, 650W power supply. The only reason is the control center. Which, if it were not compatible, should not have been installed. And here, right after the installation, the BIOS did not start. Now, how do I fix it to fix it? Because attempts to start from a pendrive do not work.
Click to expand...
 
Upvote 0 Downvote
But the most important question is Why does MSI give the possibility to install the control center on a device that is not compatible, which causes the death of the board? At least for now. Question for MSI
 
Upvote 0 Downvote
MSI don't read here, it's just MSI users helping other MSI users.

After you installed it, did you do anything with Dragon Center? At which point did it start to reboot and get into a boot loop?
 
Upvote 0 Downvote
Right after uploading the system starts going crazy, besides the fact that I didn't upload anything else, I didn't even have time to do anything else because the reset is still ongoing, 4 blue diodes, no image and sound from the motherboard
 
Last edited:
Upvote 0 Downvote
Back
Top